29
Fri, Nov
0 New Articles

TechTip: Riding the Rails, Part 1

Scripting
Typography
  • Smaller Small Medium Big Bigger
  • Default Helvetica Segoe Georgia Times

The IT industry is putting an emphasis on automation. The Ruby on Rails web framework has been doing that for a decade. Ride this rail with me as we dive into the many cool realities of Ruby on Rails.

In the February 2015 article "Trying on a Ruby Ring," I talked about doing a small Hello World Ruby app and showed how to invoke an RPG program from Ruby. In March 2015's article "Sinatra Sings, Ruby Plays," I introduced you to a very simple web framework named Sinatra. In the April 2015 article "Ruby Talks to DB2 for i," I showed how a simple Ruby web application can query DB2.

Some of those articles touched briefly on portions of the Ruby on Rails web framework (Rails for short). We are about to embark on a journey to further define the many benefits of Rails and see why so many other technology stacks have followed their lead over the years.

So, what is Rails?

Instead of giving a canned Wikipedia definition, I will instead ask a question. Do you have tasks in your daily RPG duties that are repeated time and time again, requiring manual coding that you could write in your sleep (essentially "busy work")? That's what the creator of Rails, David Heinemeier Hansson, resolved to do after doing web development for a number of years. He spent too much time doing the same things over and over in his web apps. During that time, he started recognizing patterns of best practices. It was then he decided to write a framework to address the repetitious coding. Eventually, Rails was born.

It's time to kick the tires.

In this article series, we will incrementally build a database maintenance application in PASE on IBM i using PowerRuby. There are two ways to start coding on a Rails project. Either you are creating the application or coding in an application already created. The latter involves cloning a Git repository. We will be taking the approach of creating a new Rails application from scratch by using the rails new command, as shown in the log output below. Notice how Rails generates files and directories.

Note: I am running this in a PASE shell. It's best to use ssh to log into your IBM i. However, you can also get a PASE shell using CALL QP2TERM (the poor man's shell).

$ rails new app1 --skip-bundle

     create

     create README.rdoc

     create Rakefile

     create config.ru

     create .gitignore

     create Gemfile

     create app

     create app/assets/javascripts/application.js

     create app/assets/stylesheets/application.css

     create app/controllers/application_controller.rb

     create app/helpers/application_helper.rb

     create app/views/layouts/application.html.erb

     create app/assets/images/.keep

     create app/mailers/.keep

     create app/models/.keep

     create app/controllers/concerns/.keep

     create app/models/concerns/.keep

     create bin

     create bin/bundle

     create bin/rails

     create bin/rake

     create config

     create config/routes.rb

     create config/application.rb

     create config/environment.rb

     create config/secrets.yml

     create config/environments

     create config/environments/development.rb

     create config/environments/production.rb

     create config/environments/test.rb

     create config/initializers

     create config/initializers/assets.rb

     create config/initializers/backtrace_silencers.rb

     create config/initializers/cookies_serializer.rb

     create config/initializers/filter_parameter_logging.rb

     create config/initializers/inflections.rb

     create config/initializers/mime_types.rb

     create config/initializers/session_store.rb

     create config/initializers/wrap_parameters.rb

     create config/locales

     create config/locales/en.yml

     create config/boot.rb

     create config/database.yml

     create db

     create db/seeds.rb

     create lib

     create lib/tasks

     create lib/tasks/.keep

     create lib/assets

     create lib/assets/.keep

     create log

     create log/.keep

     create public

     create public/404.html

     create public/422.html

     create public/500.html

     create public/favicon.ico

     create public/robots.txt

     create test/fixtures

     create test/fixtures/.keep

     create test/controllers

     create test/controllers/.keep

     create test/mailers

     create test/mailers/.keep

     create test/models

     create test/models/.keep

     create test/helpers

     create test/helpers/.keep

     create test/integration

     create test/integration/.keep

     create test/test_helper.rb

     create tmp/cache

     create tmp/cache/assets

     create vendor/assets/javascripts

     create vendor/assets/javascripts/.keep

     create vendor/assets/stylesheets

     create vendor/assets/stylesheets/.keep

Log output: Wow, that's a lot of created files!

So what just happened? The rails new command uses the first parameter as the name of your application, app1 in this case. The option --skip-bundle is declaring we don't want the bundle command to run, which would go out to the Internet and download the latest versions of Rails. PowerRuby gives us everything we need to write Ruby applications, so there's no need to download additional components (yet).

Why did the creators of Rails determine these directories and files should be created? This is where I'll introduce the Rails concept of Convention over Configuration, or CoC for short. CoC goes back to the heart of why David created Rails. He found the majority of web apps all need to have the same base directory structure, the same configuration files with default settings, so on and so forth. By running that single command to generate all those files and folder, we probably saved the better part of a couple hours. The actual completion time was under 5 seconds! You'll see CoC mentioned frequently throughout this article series.

Now let's go further into the generated files and directories. The first file of significance is Gemfile, a configuration file that uses the Ruby language syntax. This stores all of the dependencies of our Rails application and is shown below.

source 'https://rubygems.org'

gem 'rails', '4.1.8'

gem 'sqlite3'

gem 'sass-rails', '~> 4.0.3'

gem 'uglifier', '>= 1.3.0'

gem 'coffee-rails', '~> 4.0.0'

gem 'jquery-rails'

gem 'turbolinks'

gem 'jbuilder', '~> 2.0'

gem 'sdoc', '~> 0.4.0',         group: :doc

gem 'spring',       group: :development

As you can see, the Gemfile lists out all the Gems (think of Gems as RPG *SRVPGMs) and versions that our application makes use of. This serves two purposes. First, it keeps a running tally of the various Gems used in our application. Second, it is reviewed when deploying to production. When you deploy to production it will look at Gemfile and compare the Gems listed to the ones that exist on the local machine. If it is lacking any Gems, it will then download them from the URL specified on the source line. This is some nice automation that's a huge timesaver.

 

Interesting tidbit: HelpSystems recently sent out their 2015 survey results, which indicated automation was one of the priorities IBM i shops are looking at. Rails has had it for a decade. This is a good train to get on, folks!

Next in the log output, we see the app/assets directory and subdirectories being created. This is where your static client-side CSS and JavaScript will be stored. Likewise, we see directories created for app/controllers, app/models, and app/views. These correlate to the MVC (Model-View-Controller) concept of separating out portions of the application. To relate this to RPG, think of the Model as *SRVPGMs, where you do business logic and database access. Think of the View as your *DSPF DDS. And think of the Controller as your RPG mainline program, where you have your EXFMT and monitor for user key presses.

Next in the log output, we see many directories within the config directory. There are many configuration purposes served in here. I will highlight a few and will expound further in subsequent articles. The routes.rb is used to declare how browser requests should be routed to corresponding controllers. The environments directory has three files: development.rb, production.rb, and test.rb. Rails assumes that each application will, at minimum, need three different environments to configure the application. For example, when the application is being run in development, you will want errors to display in the browser. However, you wouldn't want the same in production for your customers to see. There's a setting for that. There are many more environment-specific settings that allow you to fine-tune. The most common settings are set for you. Note, it is very simple to add additional environments. One I usually add is called "staging"a deployment that allows select users to test before deploying to production.

File config/database.yml contains the database configuration for the three environments (development, test, and production). In this case, our application is using the SQLite database. We will convert it to use DB2 in a subsequent article.

The last thing I want to point out in the log output is the test directory. To describe this directory, I will describe my days doing RPG-CGI (web) development. When I deployed to production, it was always with a decent amount of anxiety because I didn't have unit tests for my APIs and web pages. This meant I often deployed in the evenings or on the weekends. With Rails, unit testing is not an afterthought and instead was included from ground zero.

 

Interesting stat: Amazon deploys their apps to production every 12 seconds (they obviously have many apps). Do you think they are able to do that without automated unit testing? No!

The rails new command has actually created enough foundation that we can start our application and see a "Hello World" page. PowerRuby comes bundled with an application server, so we don't need to set up Apache or other to get it working.

Before we do start the Rails webserver (and depending on which PowerRuby version you are using), you may need to add the following line to your Gemfile file:

gem 'tzinfo-data'

And whenever you add something to your Gemfile file, you also need to run the bundle command, as shown below:

$ bundle install --local

At this point, we are still outside of the app1 directory that was created with the rails new command. To run additional commands against the Rails app, we need to be within the directory by using the cd command. Then use the rails server command to start the application.

$ cd app1

$ rails server -p 8080

Open your browser and point it at port 8080 of your IBM i IP address. You should see something like Figure 1.

 

011516Bartell Figure1

Figure 1: Rails server is started and running.

That concludes this first article.

I hope I've piqued your interest enough to start exploring Ruby on Rails. We've only touched the tip of the iceberg! If you need an IBM i sandbox to start getting your hands dirty with Ruby on Rails, please contact me and I'll hook you up!

If you have any additional questions please let me know in the comments or reach me directly at This email address is being protected from spambots. You need JavaScript enabled to view it..

Aaron Bartell

Aaron Bartell is Director of IBM i Innovation for Krengel Technology, Inc. Aaron facilitates adoption of open-source technologies on IBM i through professional services, staff training, speaking engagements, and the authoring of best practices within industry publications andwww.litmis.comWith a strong background in RPG application development, Aaron covers topics that enable IBM i shops to embrace today's leading technologies, including Ruby on Rails, Node.js, Git for RPG source change management, and RSpec for unit testing RPG. Aaron is a passionate advocate of vibrant technology communities and the corresponding benefits available for today's modern application developers. Connect with Aaron via email atThis email address is being protected from spambots. You need JavaScript enabled to view it..

Aaron lives with his wife and five children in southern Minnesota. He enjoys the vast amounts of laughter that having a young family brings, along with camping and music. He believes there's no greater purpose than to give of our life and time to help others.

BLOG COMMENTS POWERED BY DISQUS

LATEST COMMENTS

Support MC Press Online

$

Book Reviews

Resource Center

  • SB Profound WC 5536 Have you been wondering about Node.js? Our free Node.js Webinar Series takes you from total beginner to creating a fully-functional IBM i Node.js business application. You can find Part 1 here. In Part 2 of our free Node.js Webinar Series, Brian May teaches you the different tooling options available for writing code, debugging, and using Git for version control. Brian will briefly discuss the different tools available, and demonstrate his preferred setup for Node development on IBM i or any platform. Attend this webinar to learn:

  • SB Profound WP 5539More than ever, there is a demand for IT to deliver innovation. Your IBM i has been an essential part of your business operations for years. However, your organization may struggle to maintain the current system and implement new projects. The thousands of customers we've worked with and surveyed state that expectations regarding the digital footprint and vision of the company are not aligned with the current IT environment.

  • SB HelpSystems ROBOT Generic IBM announced the E1080 servers using the latest Power10 processor in September 2021. The most powerful processor from IBM to date, Power10 is designed to handle the demands of doing business in today’s high-tech atmosphere, including running cloud applications, supporting big data, and managing AI workloads. But what does Power10 mean for your data center? In this recorded webinar, IBMers Dan Sundt and Dylan Boday join IBM Power Champion Tom Huntington for a discussion on why Power10 technology is the right strategic investment if you run IBM i, AIX, or Linux. In this action-packed hour, Tom will share trends from the IBM i and AIX user communities while Dan and Dylan dive into the tech specs for key hardware, including:

  • Magic MarkTRY the one package that solves all your document design and printing challenges on all your platforms. Produce bar code labels, electronic forms, ad hoc reports, and RFID tags – without programming! MarkMagic is the only document design and print solution that combines report writing, WYSIWYG label and forms design, and conditional printing in one integrated product. Make sure your data survives when catastrophe hits. Request your trial now!  Request Now.

  • SB HelpSystems ROBOT GenericForms of ransomware has been around for over 30 years, and with more and more organizations suffering attacks each year, it continues to endure. What has made ransomware such a durable threat and what is the best way to combat it? In order to prevent ransomware, organizations must first understand how it works.

  • SB HelpSystems ROBOT GenericIT security is a top priority for businesses around the world, but most IBM i pros don’t know where to begin—and most cybersecurity experts don’t know IBM i. In this session, Robin Tatam explores the business impact of lax IBM i security, the top vulnerabilities putting IBM i at risk, and the steps you can take to protect your organization. If you’re looking to avoid unexpected downtime or corrupted data, you don’t want to miss this session.

  • SB HelpSystems ROBOT GenericCan you trust all of your users all of the time? A typical end user receives 16 malicious emails each month, but only 17 percent of these phishing campaigns are reported to IT. Once an attack is underway, most organizations won’t discover the breach until six months later. A staggering amount of damage can occur in that time. Despite these risks, 93 percent of organizations are leaving their IBM i systems vulnerable to cybercrime. In this on-demand webinar, IBM i security experts Robin Tatam and Sandi Moore will reveal:

  • FORTRA Disaster protection is vital to every business. Yet, it often consists of patched together procedures that are prone to error. From automatic backups to data encryption to media management, Robot automates the routine (yet often complex) tasks of iSeries backup and recovery, saving you time and money and making the process safer and more reliable. Automate your backups with the Robot Backup and Recovery Solution. Key features include:

  • FORTRAManaging messages on your IBM i can be more than a full-time job if you have to do it manually. Messages need a response and resources must be monitored—often over multiple systems and across platforms. How can you be sure you won’t miss important system events? Automate your message center with the Robot Message Management Solution. Key features include:

  • FORTRAThe thought of printing, distributing, and storing iSeries reports manually may reduce you to tears. Paper and labor costs associated with report generation can spiral out of control. Mountains of paper threaten to swamp your files. Robot automates report bursting, distribution, bundling, and archiving, and offers secure, selective online report viewing. Manage your reports with the Robot Report Management Solution. Key features include:

  • FORTRAFor over 30 years, Robot has been a leader in systems management for IBM i. With batch job creation and scheduling at its core, the Robot Job Scheduling Solution reduces the opportunity for human error and helps you maintain service levels, automating even the biggest, most complex runbooks. Manage your job schedule with the Robot Job Scheduling Solution. Key features include:

  • LANSA Business users want new applications now. Market and regulatory pressures require faster application updates and delivery into production. Your IBM i developers may be approaching retirement, and you see no sure way to fill their positions with experienced developers. In addition, you may be caught between maintaining your existing applications and the uncertainty of moving to something new.

  • LANSAWhen it comes to creating your business applications, there are hundreds of coding platforms and programming languages to choose from. These options range from very complex traditional programming languages to Low-Code platforms where sometimes no traditional coding experience is needed. Download our whitepaper, The Power of Writing Code in a Low-Code Solution, and:

  • LANSASupply Chain is becoming increasingly complex and unpredictable. From raw materials for manufacturing to food supply chains, the journey from source to production to delivery to consumers is marred with inefficiencies, manual processes, shortages, recalls, counterfeits, and scandals. In this webinar, we discuss how:

  • The MC Resource Centers bring you the widest selection of white papers, trial software, and on-demand webcasts for you to choose from. >> Review the list of White Papers, Trial Software or On-Demand Webcast at the MC Press Resource Center. >> Add the items to yru Cart and complet he checkout process and submit

  • Profound Logic Have you been wondering about Node.js? Our free Node.js Webinar Series takes you from total beginner to creating a fully-functional IBM i Node.js business application.

  • SB Profound WC 5536Join us for this hour-long webcast that will explore:

  • Fortra IT managers hoping to find new IBM i talent are discovering that the pool of experienced RPG programmers and operators or administrators with intimate knowledge of the operating system and the applications that run on it is small. This begs the question: How will you manage the platform that supports such a big part of your business? This guide offers strategies and software suggestions to help you plan IT staffing and resources and smooth the transition after your AS/400 talent retires. Read on to learn: