29
Fri, Nov
0 New Articles

The API Corner: What Time Zone Do You Want That Date and Time In?

APIs
Typography
  • Smaller Small Medium Big Bigger
  • Default Helvetica Segoe Georgia Times


Today, we'll look at more uses for the Convert Date and Time Format API.

 

 

Last month, in How Do You Want That Date and Time?, we used the first five parameters of the Convert Date and Time Format (QWCCVTDT) API to format a date and time value stored in a *DTS format to a YYYYMMDDHHMMSS format that's much friendlier to work with. This month, we'll look at the two optional parameter groups of the API. But first some background.

 

One of the companies I work with supports multiple plants on the same system, with not all of the plants necessarily being in the same time zone. They, however, want to provide date and time values on various panels and reports in the local time zone of the plant a user is associated with. They in the past have done this by storing a time zone offset value in each plant library. So, for instance, if the system is in Mechanicsburg, Pennsylvania, then facilities in New York would have an offset value of 0, facilities in Amarillo, Texas, would have an offset value of -1, and so on. When an application needs the current date and time, it simply calls a common function and the function accesses the system local time and then adjusts it based on the offset found in the plant library. This approach is fast and works quite well in a Monday thru Friday (or Saturday) 8 to 5 environment, but only 99.97+% of the time in a 24x7 environment. For instance, this past March 8, Amarillo reported a problemnamely, that times such as 1:15 a.m. were showing up as being 2:15 a.m. This problem was due to March 8, 2015, being the start of Daylight Saving Time (DST) in the United States. At 2:00 a.m., Mechanicsburg local time moved forward by one hour to 3:00 a.m., causing the Amarillo calculation to take a local system time of say 3:15 a.m., add an hour offset value of -1, and then return 2:15 a.m.. The problem went away after 60 minutes when Amarillo also started DST at 2:00 a.m. local time.

The optional parameter groups of the QWCCVTDT API allow you to correctly (100% of the time rather than 99.97+% of the time) convert date and time values from one time zone to another. Optional parameter group one defines five parameters.

The first optional parameter is the input time zone. This is a Char(10) input value that defines the time zone associated with the time value provided in required parameter number two if the special value *CURRENT is not being used for the first required parameter. In addition to supporting the name of a time zone (*TIMZON) object, the API also supports the special values of:

  • *SYS to interpret the input value as being in the time zone specified by the QTIMZON system value. This is the default value if the parameter is not passed to the API.
  • *UTC to interpret the input time value as being a Coordinated Universal Time (UTC) value.
  • *JOB to interpret the input time value as being in the time zone specified by the time zone job attribute.

The second optional parameter is the output time zone. This parameter identifies the time zone you want the returned output value of required parameter four to be in. The parameter is defined the same as the first optional parameter and supports the same list of special values.

The third and fourth optional parameters allow you to also retrieve information about the time zone identified by the second optional parameter (the output time zone). The third parameter is a variable-length receiver variable where the API can return information such as the name of the time zone used, whether or not the time zone is currently in DST, and the full name of the time zone. The fourth optional parameter is a Bin(4) input value providing the length of the receiver variable. A value of 0, which is what we'll be using, indicates that no time zone information is to be returned to the application.

The fifth optional parameter is a Char(1) input value indicating the precision of the input and output values (required parameters two and three), respectively. A value of '0' indicates that the values have a precision in milliseconds, a value of '1' that the values have a precision of microseconds.

With that introduction, the following program (CvtDat2) calls the QWCCVTDT API twice and dsplys the resulting local current times for Mechanicsburg and Amarillo, respectively. The time zone for Mechanicsburg is QN0500EST3 and the time zone for Amarillo QN0600CST2. The WRKTIMZON command can be used to see what all time zones are defined for your system and what DST rules are defined, if any, for the various time zones.

h dftactgrp(*no)                                                 
                                                                 
d CvtDat2         pr                                             
                                                                 
d CvtDat2         pi                                             
                                                                 
 ****************************************************************
                                                                 
d CvtDatTim       pr                  extpgm('QWCCVTDT')         
d  InpFmt                       10a   const                      
d  InpValue                     20a   const options(*varsize)    
d  OutFmt                       10a   const                      
d  OutValue                     20a   options(*varsize)          
d  ErrCde                             likeds(QUSEC)              
d  InpTZ                        10a   const options(*nopass)     
d  OutTZ                        10a   const options(*nopass)     
d  TZInfo                        1a   const options(*nopass)     
d  LenTZInfo                    10i 0 const options(*nopass)     
d  PrecInd                       1a   const options(*nopass)     
d  InpTimInd                     1a   const options(*nopass)      
                                                                  
 **************************************************************** 
                                                                  
d YYMDValue       s             20a                               
                                                                  
 **************************************************************** 
                                                                  
 /copy qsysinc/qrpglesrc,qusec                                    
                                                                  
 **************************************************************** 
                                                                  
 /free                                                            
                                                                  
  CvtDatTim('*CURRENT' :' '                                       
            :'*YYMD' :YYMDValue :QUSEC                            
            :' ' :'QN0500EST3'                                    
            :' ' :0 :'0');                                        
  dsply (%char(%date(%subst(YYMDValue :1 :8) :*ISO0)) + ' ' +     
         %char(%time(%subst(YYMDValue :9 :6) :*HMS0)));           
                                                              
  CvtDatTim('*CURRENT' :' '                                   
            :'*YYMD' :YYMDValue :QUSEC                        
            :' ' :'QN0600CST2'                                
            :' ' :0 :'0');                                    
  dsply (%char(%date(%subst(YYMDValue :1 :8) :*ISO0)) + ' ' + 
         %char(%time(%subst(YYMDValue :9 :6) :*HMS0)));      

  *inlr = *on;                                                   
  return;                                                        
                                                                 
  // ************************************************************
                                                                 
  begsr *inzsr;                                                  
                                                                 
    QUSBPrv = 0;                                                 
                                                                 
  endsr;                                                         
                  
 /end-free         
                     
                                         

Calling the program results in the following messages:

DSPLY  2015-07-12 07.07.45   
DSPLY  2015-07-12 06.07.45   

The messages indicate that it is currently 7:07 a.m. on July 12, 2015, in Mechanicsburg (or more properly in the Eastern Time Zone) and 6:07 on July 12 in Amarillo (or really anywhere in the Central Time Zone).

We'll now "pretend" it's 3:15 a.m. in Mechanicsburg by changing the two API calls to the following:

  CvtDatTim('*YYMD' :'20150308031500000'                      
            :'*YYMD' :YYMDValue :QUSEC                        
            :'QN0500EST3' :'QN0500EST3'                       
            :' ' :0 :'0');                                    
  dsply (%char(%date(%subst(YYMDValue :1 :8) :*ISO0)) + ' ' + 
         %char(%time(%subst(YYMDValue :9 :6) :*HMS0)));       
                                                              
  CvtDatTim('*YYMD' :'20150308031500000'                      
            :'*YYMD' :YYMDValue :QUSEC                        
            :'QN0500EST3' :'QN0600CST2'                       
            :' ' :0 :'0');                                    
  dsply (%char(%date(%subst(YYMDValue :1 :8) :*ISO0)) + ' ' + 
         %char(%time(%subst(YYMDValue :9 :6) :*HMS0)));      

Now, calling the program results in the following messages:

DSPLY  2015-03-08 03.15.00   
DSPLY  2015-03-08 01.15.00   

This shows that it is currently 3:15 a.m. on March 8, 2015, in Mechanicsburg and 1:15 a.m. on March 8 in Amarillo. Note that the Amarillo local time is now correct.

We do still have a potential problem though, and that is when DST ends. In 2015, come November 1, the Mechanicsburg local time at 2:00 a.m. will fall back to 1:00 a.m. so there will be two instances of the time range 1:00 a.m. to 2:00 a.m. In the first instance of 1:15 a.m. for Mechanicsburg, the Amarillo local time is 00:15 a.m. while in the second instance of 1:15 a.m. it will also be 1:15 a.m. Amarillo time. How does the QWCCVTDT API know which instance (the first or second) is to be used when processing the input time value? First, the good news: if we're using the input time value of *CURRENT, the system will take care of this for us. But if we are providing a discrete value, as we are in the previous example when specifying '20150308031500000', then there are a couple of ways to handle this.

One approach is with the second optional parameter group of the QWCCVTDT API. Optional parameter group 2 defines one parameter. A Char(1) Input time indicator that, when set to '0', means we are in the second (or Standard Time) instance and if '1' we are in the first (or DST) instance. The default is '1'. This is one of the pieces of information available to you with the third and fourth parameters of optional parameter group 1.

The second approach, and the one I prefer, is to simply not use an input time zone that observes DST when working with discrete values. There are several such time zones on the system, with Q0000UTC being one, and in the case of QWCCVTDT, there is support for the special value *UTC as a time zone so you don't even have to remember the *TIMZON object name.

We can change our two calls to QWCCVTDT to use *UTC based values:

  CvtDatTim('*YYMD' :'20151101051500000'                     
            :'*YYMD' :YYMDValue :QUSEC                       
            :'*UTC' :'QN0500EST3'                            
            :' ' :0 :'0');                                   
  dsply (%char(%date(%subst(YYMDValue :1 :8) :*ISO0)) + ' ' +
         %char(%time(%subst(YYMDValue :9 :6) :*HMS0)));      
                                                             
  CvtDatTim('*YYMD' :'20151101051500000'                     
            :'*YYMD' :YYMDValue :QUSEC                       
            :'*UTC' :'QN0600CST2'                            
            :' ' :0 :'0');                                   
  dsply (%char(%date(%subst(YYMDValue :1 :8) :*ISO0)) + ' ' +
         %char(%time(%subst(YYMDValue :9 :6) :*HMS0)));      

Now, results in the two messages:

DSPLY  2015-11-01 01.15.00   
DSPLY  2015-11-01 00.15.00   

The API is returning the correct local times for the first instance of 1:15 a.m. in Mechanicsburg. Changing the discrete value '20151101051500000' to '20151101061500000' (adding one hour so that we're in the second instance of 1:15 a.m. in Mechanicsburg) results in the correct values of:

DSPLY  2015-11-01 01.15.00   
DSPLY  2015-11-01 01.15.00   

And adding yet another hour ('20151101071500000') to the UTC time value results in the local times of:

DSPLY  2015-11-01 02.15.00   
DSPLY  2015-11-01 01.15.00   

Amarillo is now on Standard Time and seeing the second instance of 1:15 a.m..

Using the QWCCVTDT API, and its time zone support, enables the correct representation of local times in a distributed environment and does not require you to personally handle the various quirks of DST. In the case of our original problemthe storing of an appropriate numeric offset value (0 for Mechanicsburg, -1 for Amarillo) per plantwe could change to storing the appropriate *TIMZON object name for the plant, use the API, and be done with it (with 100% accuracy).

Have Some System API Questions?

As usual, if you have any API questions, send them to me at This email address is being protected from spambots. You need JavaScript enabled to view it..

Bruce Vining

Bruce Vining is president and co-founder of Bruce Vining Services, LLC, a firm providing contract programming and consulting services to the System i community. He began his career in 1979 as an IBM Systems Engineer in St. Louis, Missouri, and then transferred to Rochester, Minnesota, in 1985, where he continues to reside. From 1992 until leaving IBM in 2007, Bruce was a member of the System Design Control Group responsible for OS/400 and i5/OS areas such as System APIs, Globalization, and Software Serviceability. He is also the designer of Control Language for Files (CLF).A frequent speaker and writer, Bruce can be reached at This email address is being protected from spambots. You need JavaScript enabled to view it.. 


MC Press books written by Bruce Vining available now on the MC Press Bookstore.

IBM System i APIs at Work IBM System i APIs at Work
Leverage the power of APIs with this definitive resource.
List Price $89.95

Now On Sale

BLOG COMMENTS POWERED BY DISQUS

LATEST COMMENTS

Support MC Press Online

$

Book Reviews

Resource Center

  • SB Profound WC 5536 Have you been wondering about Node.js? Our free Node.js Webinar Series takes you from total beginner to creating a fully-functional IBM i Node.js business application. You can find Part 1 here. In Part 2 of our free Node.js Webinar Series, Brian May teaches you the different tooling options available for writing code, debugging, and using Git for version control. Brian will briefly discuss the different tools available, and demonstrate his preferred setup for Node development on IBM i or any platform. Attend this webinar to learn:

  • SB Profound WP 5539More than ever, there is a demand for IT to deliver innovation. Your IBM i has been an essential part of your business operations for years. However, your organization may struggle to maintain the current system and implement new projects. The thousands of customers we've worked with and surveyed state that expectations regarding the digital footprint and vision of the company are not aligned with the current IT environment.

  • SB HelpSystems ROBOT Generic IBM announced the E1080 servers using the latest Power10 processor in September 2021. The most powerful processor from IBM to date, Power10 is designed to handle the demands of doing business in today’s high-tech atmosphere, including running cloud applications, supporting big data, and managing AI workloads. But what does Power10 mean for your data center? In this recorded webinar, IBMers Dan Sundt and Dylan Boday join IBM Power Champion Tom Huntington for a discussion on why Power10 technology is the right strategic investment if you run IBM i, AIX, or Linux. In this action-packed hour, Tom will share trends from the IBM i and AIX user communities while Dan and Dylan dive into the tech specs for key hardware, including:

  • Magic MarkTRY the one package that solves all your document design and printing challenges on all your platforms. Produce bar code labels, electronic forms, ad hoc reports, and RFID tags – without programming! MarkMagic is the only document design and print solution that combines report writing, WYSIWYG label and forms design, and conditional printing in one integrated product. Make sure your data survives when catastrophe hits. Request your trial now!  Request Now.

  • SB HelpSystems ROBOT GenericForms of ransomware has been around for over 30 years, and with more and more organizations suffering attacks each year, it continues to endure. What has made ransomware such a durable threat and what is the best way to combat it? In order to prevent ransomware, organizations must first understand how it works.

  • SB HelpSystems ROBOT GenericIT security is a top priority for businesses around the world, but most IBM i pros don’t know where to begin—and most cybersecurity experts don’t know IBM i. In this session, Robin Tatam explores the business impact of lax IBM i security, the top vulnerabilities putting IBM i at risk, and the steps you can take to protect your organization. If you’re looking to avoid unexpected downtime or corrupted data, you don’t want to miss this session.

  • SB HelpSystems ROBOT GenericCan you trust all of your users all of the time? A typical end user receives 16 malicious emails each month, but only 17 percent of these phishing campaigns are reported to IT. Once an attack is underway, most organizations won’t discover the breach until six months later. A staggering amount of damage can occur in that time. Despite these risks, 93 percent of organizations are leaving their IBM i systems vulnerable to cybercrime. In this on-demand webinar, IBM i security experts Robin Tatam and Sandi Moore will reveal:

  • FORTRA Disaster protection is vital to every business. Yet, it often consists of patched together procedures that are prone to error. From automatic backups to data encryption to media management, Robot automates the routine (yet often complex) tasks of iSeries backup and recovery, saving you time and money and making the process safer and more reliable. Automate your backups with the Robot Backup and Recovery Solution. Key features include:

  • FORTRAManaging messages on your IBM i can be more than a full-time job if you have to do it manually. Messages need a response and resources must be monitored—often over multiple systems and across platforms. How can you be sure you won’t miss important system events? Automate your message center with the Robot Message Management Solution. Key features include:

  • FORTRAThe thought of printing, distributing, and storing iSeries reports manually may reduce you to tears. Paper and labor costs associated with report generation can spiral out of control. Mountains of paper threaten to swamp your files. Robot automates report bursting, distribution, bundling, and archiving, and offers secure, selective online report viewing. Manage your reports with the Robot Report Management Solution. Key features include:

  • FORTRAFor over 30 years, Robot has been a leader in systems management for IBM i. With batch job creation and scheduling at its core, the Robot Job Scheduling Solution reduces the opportunity for human error and helps you maintain service levels, automating even the biggest, most complex runbooks. Manage your job schedule with the Robot Job Scheduling Solution. Key features include:

  • LANSA Business users want new applications now. Market and regulatory pressures require faster application updates and delivery into production. Your IBM i developers may be approaching retirement, and you see no sure way to fill their positions with experienced developers. In addition, you may be caught between maintaining your existing applications and the uncertainty of moving to something new.

  • LANSAWhen it comes to creating your business applications, there are hundreds of coding platforms and programming languages to choose from. These options range from very complex traditional programming languages to Low-Code platforms where sometimes no traditional coding experience is needed. Download our whitepaper, The Power of Writing Code in a Low-Code Solution, and:

  • LANSASupply Chain is becoming increasingly complex and unpredictable. From raw materials for manufacturing to food supply chains, the journey from source to production to delivery to consumers is marred with inefficiencies, manual processes, shortages, recalls, counterfeits, and scandals. In this webinar, we discuss how:

  • The MC Resource Centers bring you the widest selection of white papers, trial software, and on-demand webcasts for you to choose from. >> Review the list of White Papers, Trial Software or On-Demand Webcast at the MC Press Resource Center. >> Add the items to yru Cart and complet he checkout process and submit

  • Profound Logic Have you been wondering about Node.js? Our free Node.js Webinar Series takes you from total beginner to creating a fully-functional IBM i Node.js business application.

  • SB Profound WC 5536Join us for this hour-long webcast that will explore:

  • Fortra IT managers hoping to find new IBM i talent are discovering that the pool of experienced RPG programmers and operators or administrators with intimate knowledge of the operating system and the applications that run on it is small. This begs the question: How will you manage the platform that supports such a big part of your business? This guide offers strategies and software suggestions to help you plan IT staffing and resources and smooth the transition after your AS/400 talent retires. Read on to learn: