29
Fri, Nov
0 New Articles

TechTalk

General
Typography
  • Smaller Small Medium Big Bigger
  • Default Helvetica Segoe Georgia Times

Testing for Multithreading

I often write little CL driver programs for my Java code. This is an easy way for my RPG programs to use my Java utilities. However, if a job environment doesn’t allow multithreading, the Run Java (RUNJVA) command in the CL program fails.

I couldn’t find an easy way to determine whether or not a CL program is running in a multithreaded environment. At least, the Retrieve Job Attributes (RTVJOBA) command doesn’t have this parameter in V4R3. Still, I knew that, if a CL program could determine that it was not running in a multithreaded environment, it could take some corrective action. For example, before running a Java program, it might submit itself as a batch job with ALWMTTHD(*YES) specified. For this reason, I wrote the ISALWMTTHD program, shown in Figure 1.

ISALWMTTHD has two parameters, Return code and Error code. If the job is multithreaded, ISALWMTTHD places a 1 in the return code; if it is not, it places a zero. If all proceeds without error, the error code is blanked out. Otherwise, ISALWMTTHD places the message ID of the error message it receives.

— Alex Garrison This email address is being protected from spambots. You need JavaScript enabled to view it.

/*==================================================================*/

/* ISALWMTTHD */
/* Check to see if this job allows multiple threads. */
/* returns ‘0’ if multithreaded not allowed. */
/* ‘1’ if multithreaded allowed. */
/* errcd is the CPFxxxx error if any. */
/*==================================================================*/

/* To compile: */
/* */

/* CRTBNDCL PGM(XXX/ISALWMTTHD) SRCFILE(XXX/QCLSRC) + */
/* DFTACTGRP(*NO) ACTGRP(*CALLER) */
/* */

/*==================================================================*/

pgm parm(&rtncd &cpferr)

dcl var(&rtncd) type(*char) len(1)

dcl var(&cpferr) type(*char) len(7)

/* vars for qwcrtvca api */

dcl var(&rcvvar) type(*char) len(21)

dcl var(&rcvlenbin) type(*char) len(4)

dcl var(&rcvlen) type(*dec) len(3 0) value(21)

dcl var(&fmtnam) type(*char) len(8) value(‘RTVC0100’)

dcl var(&numattrbin) type(*char) len(4)

dcl var(&numattr) type(*dec) len(3 0) value(1)

dcl var(&attrbin) type(*char) len(4)

dcl var(&attr) type(*dec) len(4 0) value(0102)

/* vars for rtvc0100 format */

dcl var(&rnattrbin) type(*char) len(4)

dcl var(&rnattr) type(*dec) len(3 0)

dcl var(&rlattrbin) type(*char) len(4)

dcl var(&rlattr) type(*dec) len(3 0)

dcl var(&rkeybin) type(*char) len(4)

dcl var(&rkey) type(*dec) len(4 0)

dcl var(&rdattype) type(*char) len(1)

dcl var(&rdatlenbin) type(*char) len(4)

dcl var(&rdatlen) type(*dec) len(4 0)

dcl var(&dat) type(*char) len(1)

/* vars for errorcode */

dcl var(&errcd) type(*char) len(23)

dcl var(&bytprovbin) type(*char) len(4)

dcl var(&bytprov) type(*dec) len(2 0) value(15)

/* convert dec values to 4 byte binary and store in temp char var*/

chgvar var(%bin(&rcvlenbin)) value(&rcvlen)

chgvar var(%bin(&numattrbin)) value(&numattr)

chgvar var(%bin(&attrbin)) value(&attr)

chgvar var(%bin(&bytprovbin)) value(&bytprov)

chgvar var(&errcd) value(&bytprovbin)

chgvar var(&rtncd ) value(‘0’) /* assume not multithreaded */

call qwcrtvca parm(&rcvvar &rcvlenbin &fmtnam &numattrbin +

&attrbin &errcd)

chgvar var(&cpferr) value(%sst(&errcd 9 7))

if cond(&cpferr *eq ‘ ‘) then(do)

/*no error. unpack msg */

chgvar var(&rnattrbin) value(%sst(&rcvvar 1 4))

chgvar var(&rnattr) value(%bin(&rnattrbin))

chgvar var(&rlattrbin) value(%sst(&rcvvar 5 4))

chgvar var(&rlattr) value(%bin(&rlattrbin))

chgvar var(&rkeybin) value(%sst(&rcvvar 9 4))

chgvar var(&rkey) value(%bin(&rkeybin))

chgvar var(&rdattype) value(%sst(&rcvvar 13 1))

chgvar var(&rdatlenbin) value(%sst(&rcvvar 17 4))

chgvar var(&rdatlen) value(%bin(&rdatlenbin))

chgvar var(&dat) value(%sst(&rcvvar 21 1))

if cond((&rnattr *eq 1) *and (&rkey *eq &attr) *and +

(&rdatlen *eq 1)) then(do)

chgvar var(&rtncd) value(&dat)

enddo

enddo

endpgm

Figure 1: Any job that needs to determine whether or not multithreading is allowed can call ISALWMTTHD.

Which JDK Do I Use?

V4R5 now ships with four different, optionally installable versions of AS/400
Development for Java: JDK 1.1.6, JDK 1.1.7, JDK 1.1.8, and JDK 1.2. (JDK 1.3 is now available as a PTF.) With all those installed, how do you qualify which one is to be used? I had to tackle that problem myself recently because I use several open source Java products that require either JDK 1.2 or JDK 1.3.

The easiest solution is to qualify the JDK in the Java command with the java.version option: However, you sometimes don’t have access to the Java command (as with IBM’s SQLJ utilities). Besides, adding that option can become tiring if you want a specific JDK to be your default.

You can do just that by adding the string java.version=1.2 to a text file called System-Default.properties. This file can exist in one of two places in the AS/400 Integrated File System (AS/400 IFS): your user home directory or the Java home directory. Your user home directory is qualified in your user profile, so use the Display User Profile (DSPUSRPRF) command to see what yours is set to. (I’ll tell you that it defaults to a
directory of your profile name underneath the /home directory.) The Java home directory is
/QIBM/UserData/Java400/.

java -Djava.version=1.2 MyClass

The easiest way to modify (or create, if it doesn’t already exist) the SystemDefault.properties file in your AS/400 IFS is to use the Edit File (EDTF) command: To find the setting of the JDK, Java looks first to the Java command options, then to the user home’s SystemDefault.properties file, then to the Java home’s SystemDefault.properties file, and finally to an environment variable.

Don Denoncourt Senior Technical Editor
Midrange Computing

Checking for the Existence of an IFS Stream File

Q: Do you know the best way to check for the existence of an AS/400 Integrated File System (AS/400 IFS) stream file? I’m not asking to check authority or such as can be done with the Check Object (CHKOBJ) or Check Document Library Object (CHKDLO) command, although that would be a nice utility.

I’ve decided to settle on CHKIN OBJ(‘/path/streamfile.name’) and monitor for CPFA0A9 (“Object not found”). Do you have a better idea? I don’t think that the Check In Object (CHKIN) command modifies the object in any way. I tested it, and it didn’t change any attributes displayed with the Work with Link (WRKLNK) option (option 8).

— Ken Rokos

A: Figure 2 illustrates a CL solution that requires no RPG wrappers. It uses the C stat( ) function.

— James Swan Baycorp Holdings Ltd.

A: The code in Figure 3 performs the same function as James’ CL program, but it does so as an RPG IV service program I call CheckExist.

— Jerry Hensley

Peerless Chain

A: Over the years, I have relied extensively on CHKOBJ to see whether or not a file existed. I used CHKOBJ to ensure that the necessary files and authority were in place to minimize the cleanup and recovery required whenever a complex job stream failed. Recently, however, I began supporting purchased applications on the AS/400 that use AS/400 IFS files extensively. These purchased applications are ported from UNIX to run on the AS/400 and do not use native AS/400 messaging techniques to indicate when an error has occurred.

This lack of standard message handling made it more difficult to integrate these programs into my company’s own systems and job streams. To simplify their integration, I created a Check IFS Object (CHKIFSOBJ) command, which mimics the AS/400’s native CHKOBJ. This simple command uses the access() UNIX API to check whether or not a file exists and, optionally, to check authority to the file.

In general, the UNIX APIs are easier to use than regular AS/400 IFS APIs. The access() API takes a file path and an integer value representing the authority to check. If the
file is not found or the user does not have authority to the file, the API returns a -1. If the file exists and the user’s authority is sufficient, it returns a zero.

You can download the source code for CHKIFSOBJ at www.midrangecomputing.com/mc.

EDTF ‘/home/Denoncourt/ SystemDefault.properties’

Then, add the entry:

java.version=1.3

— David Morris

pgm

dcl var(&PATH) type(*CHAR) len(256) +

value(‘/mydir/myfile’)

dcl var(&BUFFER) type(*CHAR) len(256)

dcl var(&RV) type(*CHAR) len(2)

dcl var(&NULL) type(*CHAR) len(1) value(X’00’)

/* stat() requires null terminated strings */

chgVar var(&PATH) value(&PATH *tcat &NULL)

chgVar var(&BUFFER) value(&BUFFER *tcat &NULL)

/* Check if IFS file exists */

callPrc prc(STAT) parm(&PATH &BUFFER) +

rtnVal(%binary(&RV))

if cond(%binary(&RV) *EQ -1) then(do)

/* IFS file (or directory) not found */

enddo

endpgm

*===============================================================

* To compile:

*

* CRTRPGMOD MODULE(XXX/CHECKEXIST) SRCFILE(XXX/QRPGLESRC)

* CRTSRVPGM SRVPGM(XXX/CHECKEXIST) EXPORT(*ALL)

*

*===============================================================

H NOMAIN

H BNDDIR(‘QC2LE’)

D CheckExist PR 1n

D p_FilePath 256 const

* Unix Type Error Number/Message pointers, fields and ProtoTypes

D Ptr_ErrorNum S * inz

D Ptr_ErrorMsg S * inz

D Error_Number S 10I 0 based(Ptr_ErrorNum)

D Error_Msg S 256A based(Ptr_ErrorMsg)

D GetErrorNum PR * extproc(‘__errno’)

D GetErrorMsg PR * extproc(‘strerror’)

D p_ErrorNumber 10i 0 value

*——————————————————————————————————-* CheckExist - Check for the Existence of the Stream File returns:

* True (‘1’/*ON ) if file exist

* False (‘0’/*OFF) if file does not exist

*——————————————————————————————————-P CheckExist B export

D CheckExist PI 1n

D p_FilePath 256 const

* Definitions for Procedure Defined Work Fields and Pointers

D File_Exist S 1n

D w_FilePath S 256

D w_Buffer S 1

D w_ReturnCode S 10i 0

D Ptr_FilePath S * inz(%addr(w_FilePath))

D Ptr_Buffer S * inz(%addr(w_Buffer))

* Unix Type Procedure Prototype

D Statistics PR 10i 0 extproc(‘stat’)

D p_PtrPath * value

D p_Buffer * value

Figure 2: Here’s an easy way for a CL program to check the existence of an AS/400 IFS file.

C eval w_FilePath = %trim(p_FilePath) + x’00’

C eval w_ReturnCode = Statistics(Ptr_FilePath :

C Ptr_Buffer )

* It is assumed, if the return code is less than zero, the file does

* not exist. Other errors may cause this condition and may be

* determined by examining Error_Number and Error_Msg

C If w_ReturnCode < *ZERO

C eval Ptr_ErrorNum = GetErrorNum

C eval Ptr_ErrorMsg = GetErrorMsg(Error_Number)

C eval File_Exist = *OFF

C else

C eval File_Exist = *ON

C endIf

C return File_Exist

P E

Figure 3: The CheckExist service program is just the thing for verifying the existence of AS/400 IFS files in ILE applications.

BLOG COMMENTS POWERED BY DISQUS

LATEST COMMENTS

Support MC Press Online

$

Book Reviews

Resource Center

  • SB Profound WC 5536 Have you been wondering about Node.js? Our free Node.js Webinar Series takes you from total beginner to creating a fully-functional IBM i Node.js business application. You can find Part 1 here. In Part 2 of our free Node.js Webinar Series, Brian May teaches you the different tooling options available for writing code, debugging, and using Git for version control. Brian will briefly discuss the different tools available, and demonstrate his preferred setup for Node development on IBM i or any platform. Attend this webinar to learn:

  • SB Profound WP 5539More than ever, there is a demand for IT to deliver innovation. Your IBM i has been an essential part of your business operations for years. However, your organization may struggle to maintain the current system and implement new projects. The thousands of customers we've worked with and surveyed state that expectations regarding the digital footprint and vision of the company are not aligned with the current IT environment.

  • SB HelpSystems ROBOT Generic IBM announced the E1080 servers using the latest Power10 processor in September 2021. The most powerful processor from IBM to date, Power10 is designed to handle the demands of doing business in today’s high-tech atmosphere, including running cloud applications, supporting big data, and managing AI workloads. But what does Power10 mean for your data center? In this recorded webinar, IBMers Dan Sundt and Dylan Boday join IBM Power Champion Tom Huntington for a discussion on why Power10 technology is the right strategic investment if you run IBM i, AIX, or Linux. In this action-packed hour, Tom will share trends from the IBM i and AIX user communities while Dan and Dylan dive into the tech specs for key hardware, including:

  • Magic MarkTRY the one package that solves all your document design and printing challenges on all your platforms. Produce bar code labels, electronic forms, ad hoc reports, and RFID tags – without programming! MarkMagic is the only document design and print solution that combines report writing, WYSIWYG label and forms design, and conditional printing in one integrated product. Make sure your data survives when catastrophe hits. Request your trial now!  Request Now.

  • SB HelpSystems ROBOT GenericForms of ransomware has been around for over 30 years, and with more and more organizations suffering attacks each year, it continues to endure. What has made ransomware such a durable threat and what is the best way to combat it? In order to prevent ransomware, organizations must first understand how it works.

  • SB HelpSystems ROBOT GenericIT security is a top priority for businesses around the world, but most IBM i pros don’t know where to begin—and most cybersecurity experts don’t know IBM i. In this session, Robin Tatam explores the business impact of lax IBM i security, the top vulnerabilities putting IBM i at risk, and the steps you can take to protect your organization. If you’re looking to avoid unexpected downtime or corrupted data, you don’t want to miss this session.

  • SB HelpSystems ROBOT GenericCan you trust all of your users all of the time? A typical end user receives 16 malicious emails each month, but only 17 percent of these phishing campaigns are reported to IT. Once an attack is underway, most organizations won’t discover the breach until six months later. A staggering amount of damage can occur in that time. Despite these risks, 93 percent of organizations are leaving their IBM i systems vulnerable to cybercrime. In this on-demand webinar, IBM i security experts Robin Tatam and Sandi Moore will reveal:

  • FORTRA Disaster protection is vital to every business. Yet, it often consists of patched together procedures that are prone to error. From automatic backups to data encryption to media management, Robot automates the routine (yet often complex) tasks of iSeries backup and recovery, saving you time and money and making the process safer and more reliable. Automate your backups with the Robot Backup and Recovery Solution. Key features include:

  • FORTRAManaging messages on your IBM i can be more than a full-time job if you have to do it manually. Messages need a response and resources must be monitored—often over multiple systems and across platforms. How can you be sure you won’t miss important system events? Automate your message center with the Robot Message Management Solution. Key features include:

  • FORTRAThe thought of printing, distributing, and storing iSeries reports manually may reduce you to tears. Paper and labor costs associated with report generation can spiral out of control. Mountains of paper threaten to swamp your files. Robot automates report bursting, distribution, bundling, and archiving, and offers secure, selective online report viewing. Manage your reports with the Robot Report Management Solution. Key features include:

  • FORTRAFor over 30 years, Robot has been a leader in systems management for IBM i. With batch job creation and scheduling at its core, the Robot Job Scheduling Solution reduces the opportunity for human error and helps you maintain service levels, automating even the biggest, most complex runbooks. Manage your job schedule with the Robot Job Scheduling Solution. Key features include:

  • LANSA Business users want new applications now. Market and regulatory pressures require faster application updates and delivery into production. Your IBM i developers may be approaching retirement, and you see no sure way to fill their positions with experienced developers. In addition, you may be caught between maintaining your existing applications and the uncertainty of moving to something new.

  • LANSAWhen it comes to creating your business applications, there are hundreds of coding platforms and programming languages to choose from. These options range from very complex traditional programming languages to Low-Code platforms where sometimes no traditional coding experience is needed. Download our whitepaper, The Power of Writing Code in a Low-Code Solution, and:

  • LANSASupply Chain is becoming increasingly complex and unpredictable. From raw materials for manufacturing to food supply chains, the journey from source to production to delivery to consumers is marred with inefficiencies, manual processes, shortages, recalls, counterfeits, and scandals. In this webinar, we discuss how:

  • The MC Resource Centers bring you the widest selection of white papers, trial software, and on-demand webcasts for you to choose from. >> Review the list of White Papers, Trial Software or On-Demand Webcast at the MC Press Resource Center. >> Add the items to yru Cart and complet he checkout process and submit

  • Profound Logic Have you been wondering about Node.js? Our free Node.js Webinar Series takes you from total beginner to creating a fully-functional IBM i Node.js business application.

  • SB Profound WC 5536Join us for this hour-long webcast that will explore:

  • Fortra IT managers hoping to find new IBM i talent are discovering that the pool of experienced RPG programmers and operators or administrators with intimate knowledge of the operating system and the applications that run on it is small. This begs the question: How will you manage the platform that supports such a big part of your business? This guide offers strategies and software suggestions to help you plan IT staffing and resources and smooth the transition after your AS/400 talent retires. Read on to learn: