02
Sat, Nov
2 New Articles

TechTalk July 1998

General
Typography
  • Smaller Small Medium Big Bigger
  • Default Helvetica Segoe Georgia Times

OPNQRYF and Named Activation Groups

I ran across an interesting but obvious “gotcha” while recently rewriting an application. I was using ILE and compiling the objects to use a named activation group. The only program I didn’t change was a CL program that ran Open Query File (OPNQRYF) to select records for a report. When I ran the report program, I was surprised to find that the report had printed all the records from the file and ignored the open data path that the OPNQRYF had created. Then, it dawned on me that I was using a named activation group for the RPGLE program, and the CLP was running in the default activation group. My solution to this problem was to change the CLP to a CLLE and compile it to run in the same activation group as the RPGLE program.

This led me to do some testing. Here are the ways I found that let an RPG IV program compiled to use a named activation group use the ODP built by OPNQRYF:

• Compile the CLLE program to use the same activation group the RPGLE program uses.

• Compile the CLLE and RPGLE sources into modules, and bind the modules into a single program.

• Specify OPNSCOPE(*JOB) on the OPNQRYF or Override Database File (OVRDBF) command in a CLP or CLLE program.

The last is probably not a good option, in general. One of the primary purposes of ILE is to isolate different uses of the same resources within a job. Using job-level opens and overrides defeats that purpose.

— Bradley V. Stone This email address is being protected from spambots. You need JavaScript enabled to view it. http://prairie.lakes.com/~bvstone

Log OCL Procedure Usage

Keeping a clean system and preparing for major projects (such as the Year 2000 challenge) is difficult if you have no idea what’s good and what’s garbage. OS/400 can

help you with that chore. The system keeps up with the last time an object is used and how many times it has been used.

However, it doesn’t keep up with OCL procedure usage. To fill this void, we wrote the LOGOCLPROC utility. It consists of four objects—physical file PROCLOG, command LOGOCLPROC, a CL program OCL001CL, and RPG III program OCL001RG—shown in Figures 1 through 4.

Include the LOGOCLPROC command at the beginning of any OCL or REXX procedure you want to log. You can see an example of this in Figure 5.

We use generic reporting tools, like Query/400, to view the file. — Steve Barnard
Garan, Inc.

Starkville, Mississippi

Help with RPG IV Debugging

IBM recently fixed two RPG IV debugger problems that may have been bugging you. The first problem is that run-time error messages indicate compiler listing line numbers, rather than the source member sequence numbers. This required programmers to recompile a program to find out what line of code was failing. Now, you can specify OPTION(*SRCSTMT) on the control (H) spec if you want the object to contain source sequence numbers.

The second problem is that input and output specs generate debugging breakpoints. IBM added another permissible OPTION keyword—*NODEBUGIO—in this same fix. OPTION(*NODEBUGIO) prevents the generation of breakpoints on input and output specifications.

If you want to specify both values, separate them with a colon.

OPTION(*SRCSTMT : *NODEBUGIO)

There are also opposite values of *NOSRCSTMT and *DEBUGIO, but you probably won’t need them, since they are the default values.

The APAR number is SA70333. The PTF numbers containing the fixes are listed in the table in Figure 6.

— Doug Pence and Ron Hawkins

— Jon Paris IBM Toronto

Is Your Laptop Client Access Configuration Affecting Your Battery Life?

Earlier this year, IBM issued a fix for a problem involving battery life on laptops running Client Access/400 for Windows 95/NT. For earlier versions of the software, users experienced battery life problems after loading up Client Access. This occurred even if the user wasn’t running Client Access.

The problem occurs because—after Client Access installation—Windows 95/NT loads up the Client Access/400 Task Bar Icon Extension application, CWBUITSK.EXE, into memory. CWBUITSK displays the small AS/400 icon on the Windows 95 toolbar when you are attached to an AS/400. In its earlier versions, CWBUITSK affected battery life on laptops.

This problem was fixed in Client Access/400 in the following service packs:
• For V3R1M2: Service pack SF46059 and above—issued February 1998
• For V3R1M3: Service pack SF46891 and above—issued April 1998 In these service packs, CWBUITSK has been changed to improve laptop battery life. IBM does not state that it solves all battery life issues, but they believe this change may help. After installing the fix, CWBUITSK will still be loaded at startup, but it is idled and will only process information when a Client Access connection is started or disconnected.

For V3R1M0 and V3R1M1 clients, this fix is not available, and IBM has no further plans to issue service packs for these clients. To fix, I recommend you upgrade your Client Access laptop configuration to V3R1M2 or V3R1M3 with the appropriate service packs.

Information on this problem can be found in APAR SA70701 or within the READMESP.TXT files that come with the most recent V3R1M2 and V3R1M3 service packs.

— Joe Hertvik Senior Technical Editor Midrange Computing

Calling Native Programs from a S/36 Program, Continued

Last month, I published a program to pack zoned decimal data so S/36 programs could pass packed decimal values to native programs. This month, I publish a companion program, NBR012RG, which converts packed decimal values to zoned decimal (see Figure 7).

An RPG II program must pass character variables instead of packed variables to native programs. Upon return from the native program, the character variables contain packed data. To unpack the data, the RPG II program calls NBR012RG, passing it the following parameters:

• A character variable containing a packed decimal value
• A zoned decimal variable to contain the unpacked data
• The length (number of digits) in the zoned number
• A 1 to deactivate NBR011RG, or a 0 to leave it active NBR012RG will return a zoned value in the second parameter. — Ted Holt
Senior Technical Editor
Midrange Computing

Resolve Java Class Attribute Ambiguity

The concept of scope is important in Java. Midrange programmers are typically familiar only with global scope, which means that variables defined anywhere in a program are accessible throughout the program. RPG IV programs have local as well as global

scope. Variables defined within an RPG IV subprocedure have local scope (they’re accessible only within that subprocedure), whereas variables defined in the mainline code are still globally accessible.

With Java, a class has attributes that have global scope—that is, the attributes (essentially variables) are accessible to all functions of that class. But a variable defined within a function of that class is accessible only within that function. This goes the same for the function parameters.

Class attributes are usually declared private so that nothing outside the class can modify them. The functions that modify class attributes are usually named “setXXX,” where XXX is the attribute. The obvious name for the parameter to a set function would be the attribute name.

The Order class in Figure 8 has an orderDate attribute and a setOrderDate function to modify the orderDate attribute. The parameter to setOrderDate is also called orderDate, the same name as the class attribute. Within the setOrderDate function, any references to orderDate would refer to the parameter (local), not to the class attribute (global).

The Java keyword this can be used to resolve the ambiguity between the orderDate parameter and the orderDate class attribute. The Java reserved word this refers to the object itself. The class example in Figure 8 sets the class’s orderDate attribute to the passed parameter of the same name.

Other publications suggest using a naming convention to resolve ambiguity of passed parameter variable names. One suggestion is to prefix an “a” to the beginning of parameter names. I find the prefix makes the code harder to read. I think use of the this qualifier is more clear.

— Don Denoncourt Senior Technical Editor Midrange Computing

Is This File a Source File? (Revisited)

In the January 1998 issue of MC, I published a utility command named ISSRCF (see “TechTalk: Is This File a Source File?”). The command is designed to find out if a given file is a source file, and I wrote the command processing program (CPP) in CL. After it was published, I received a short email from Kurt Wagner (in the United Kingdom), which went as follows:

I just want to add that the OS/400 system file QADBXREF contains a record for each file in the system. There is also a field named DBXTYP that contains an S if the file is a source file. [...] Of course, your utility is working fine for releases prior to V3R1, but I prefer this solution.

Kurt is absolutely right. My ISSRCF command goes through unnecessary gyrations to do what a simple file interrogation can do. If you would rather use the QADBXREF method, change the ISSRCF command so it uses, as a CPP, RPG IV program SRC015RG (see Figure 9). To perform the change, run the following:

CHGCMD +

CMD(xxx/ISSRCF) +

PGM(xxx/SRC015RG)

I won’t bore you with describing the workings of SRC015RG, because they’re rather obvious. Just the same, though, I’d like to raise a couple of interesting points about QADBXREF:

• It contains several variable-length fields. One of them can reach lengths greater than 9,999 bytes. This problem made it necessary to compile SRC015RG with CVTOPT(*VARCHAR).

• Some fields are null-capable and, in fact, contain nulls. This feature required ALWNULL(*YES) in the compilation of the program.

As of V4R2, RPG III cannot deal with fields longer than 9,999 bytes. CL can’t, either. And no version of COBOL can cope with null fields. I’m mentioning all this to explain why I found it necessary to code SRC015RG in RPG IV. If you don’t have an RPG IV compiler, you can still use ISSRCF with its original CL CPP. It may not be an elegant solution, but it still works.

— Ernie Malaga Senior Technical Editor Midrange Computing

Easy Random Number Generator

I know this type of thing has been written and published in every language known to man (and I know there’s an API, too), but CL program NBR010CL (Figure 10) provides an easy way to get a random number in any range from 0 to 32,767.

NBR010CL calls on REXX procedure NBR010RX (Figure 11) to generate a random number in the desired range. REXX returns the random number as a completion code. The STRREXPRC command generates a CPF7CFF on any nonzero completion code, and that completion code can be extracted from the message, beginning in position

Removing the Client Access/400 Windows 95/NT Check Service Pack Level Program

Q: Since I installed the Client Access for Windows 95/NT client on my PC, a “Check Version” program runs every time I boot up. How do I keep it from running?

A: The Client Access/400 Windows 95/NT client automatically installs a shortcut in your startup folder that points to the Client Access Check Service Pack Level program. This program checks the Service Pack Level of your Client Access installation against the managing system (usually your main AS/400) to see if they are the same. If they match, nothing happens. If they don’t match, you will see a prompt that allows you to install the newest Service Pack Level from the managing system to your Windows 95/NT client. This is IBM’s attempt to allow your users to automatically update their Client Access/400 PC configurations when an upgrade is installed.

However, many people dislike the additional time it takes to perform the service pack check. In addition, since many companies don’t install service packs that often and they like to control when a service pack is loaded on a user’s PC (for compatibility and debugging purposes), a lot of companies like to remove this program from their user’s Windows 95/NT startup folders.


31.

— Tom Conover Warner/Chappell Music, Inc. Los Angeles, CA

If you want to remove the service program from your Windows startup folder, here’s how to do it:

1. Click on the Win95 Start button.

2. Click Settings.

3. Click Taskbar.

4. Click the Start Menu Programs

5. Click Remove.

6. Scroll down until you see StartUp on the Remove Shortcuts/Folders panel.

7. Double-click StartUp.

8. You’ll see the Check Version Program icon.

9. Click this once to highlight it, then click the Remove button.
10. Answer “Yes” to the message “Are You Sure You Want To Send This Icon To The Recycle Bin?”

If you want, you can empty your recycle bin to permanently remove the shortcut from your system. The check version executable will still be on your system. Emptying the recycle bin will just permanently remove the shortcut that was in Startup.

— Shannon O’Donnell This email address is being protected from spambots. You need JavaScript enabled to view it.

— Joe Hertvik Senior Technical Editor Midrange Computing

PSDS Affects ILE RPG Program Initialization

ILE RPG programs with either no Program Status Data Structure (PSDS) or a very short PSDS go through the initialization (*INIT) part of the cycle very quickly, compared to OPM RPG. Some of the fields in the PSDS—for example, the program, module, library, job name, and number—are expensive to fill in. If the PSDS isn’t long enough to contain these fields, ILE RPG doesn’t bother to fill them in during initialization, but OPM RPG does.

— Barbara Morris IBM Toronto Lab RPG Compiler Development

Editor’s note: Barbara mentioned this in passing while discussing another topic in MC’s Web Forums. The moral of the story seems to be, don’t code any more of the PSDS than you have to in RPG IV.

*===============================================================

* To compile:

*

* CRTPF FILE(XXX/PROCLOG) SRCFILE(XXX/QDDSSRC) +

* TEXT(‘Log OCL procedure usage’)

*

*===============================================================

A R RECCNT

A MBRNME 10A COLHDG(‘ ‘ ‘Procedure’ ‘name’)

A MBRLIB 10A COLHDG(‘ ‘ ‘Library’ ‘name’)

A ORGDAT 8A COLHDG(‘Date’ ‘first’ ‘logged’)

A MBRDAT 8A COLHDG(‘Date’ ‘last’ ‘used’)

A PRCACC 7S 0 COLHDG(‘ ‘ ‘Times’ ‘accessed’)

A USER 10A COLHDG(‘ ‘ ‘ ‘ ‘User’)

A K MBRNME

A K MBRLIB /*==================================================================*/

/* To compile: */
/* */

/* CRTCMD CMD(XXX/LOGOCLPROC) PGM(XXX/OCL001CL) + */
/* SRCFILE(XXX/QCMDSRC) TEXT(‘Log OCL + */
/* procedure usage’) */
/* */

/*==================================================================*/

CMD PROMPT(‘Log OCL Procedure Usage’)

PARM KWD(PROC) TYPE(*CHAR) LEN(10) MIN(1) +

PROMPT(‘Procedure’)

PARM KWD(LIB) TYPE(*CHAR) LEN(10) MIN(1) +

PROMPT(‘Library’) /*==================================================================*/

/* To compile: */
/* */

/* CRTCLPGM PGM(XXX/OCL001CL) SRCFILE(XXX/QCLSRC) + */
/* TEXT(‘Log OCL procedure usage’) */
/* */

/*==================================================================*/

PGM PARM(&PROC &LIB)

DCL VAR(&PROC) TYPE(*CHAR) LEN(10)

DCL VAR(&LIB) TYPE(*CHAR) LEN(10)

OVRDBF FILE(PROCLOG) TOFILE(MAGWORK/PROCLOG)

CALL PGM(OCL001RG) PARM(&PROC &LIB)

DLTOVR FILE(PROCLOG)

ENDPGM

*===============================================================

* To compile:

*

* CRTRPGPGM PGM(XXX/OCL001RG) SRCFILE(XXX/QRPGSRC) +

* TEXT(‘Log OCL procedure usage’)

*

*===============================================================

FPROCLOG UF E K DISK A

I SDS

I 254 263 S#USER

I 276 279 S#MD

I 280 281 S#Y

C *ENTRY PLIST

C PARM MBRNME

C PARM MBRLIB

C*

C KEY1 KLIST

C KFLD MBRNME

C KFLD MBRLIB

C*

C KEY1 CHAINRECCNT 99

C*

C MOVE S#USER USER

C S#Y IFGE ‘40’

Figure 1: The procedure logging file, PROCLOG

Figure 2: The LOGOCLPROC command

Figure 3: LOGOCLPROC’s command processing program, OCL001CL

C MOVEL’19’ YEAR 4

C ELSE

C MOVEL’20’ YEAR

C ENDIF

C MOVE S#Y YEAR

C MOVELYEAR MBRDAT

C MOVE S#MD MBRDAT

C*

C *IN99 IFEQ *ON

C Z-ADD1 PRCACC

C MOVE MBRDAT ORGDAT

C WRITERECCNT

C ELSE

C ADD 1 PRCACC

C UPDATRECCNT

C ENDIF

C*

C MOVE *ON *INLR

C RETRN LOGOCLPROC PROC(xxx) LIB(?CLIB?)

Figure 4: RPG program OCL001RG logs the procedure data to disk

Figure 5: Include a line like this one at the beginning of procedures to be logged

For Current Releases PTF

V3R2M0 SF46001 V3R6M0 SF45749 V3R7M0 SF46327 V4R2M0 SF45191

For Prior Releases

V3R7M0 SF47056 V4R2M0 SF46944 V4R2M0 SF47055

Figure 6: These PTFs enable new compiler options for better debugging

*===============================================================

* To compile:

*

* CRTRPGPGM PGM(XXX/NBR012RG) SRCFILE(XXX/QRPGSRC)

*

*===============================================================

* Convert a packed decimal number to zoned decimal.

* This program is meant to be called by S/36 RPG II programs,

* but must be compiled as an RPG III program.

*

* Parameter list

* Name Length Description

* PACKED * defined as character in RPG II caller

* must be defined as the length of ZONED

* when packed

* ZONED * any zoned decimal value

* ZONELN 2,0 length of ZONED as a 2-digit zoned number

* SETLR 1 ‘1’ sets on LR indicator, unloading this

* program from memory

*===============================================================

IZONED DS

I 1 10ZONE01

I 1 20ZONE02

I 1 30ZONE03

I 1 40ZONE04

I 1 50ZONE05

I 1 60ZONE06

I 1 70ZONE07

I 1 80ZONE08

I 1 90ZONE09

I 1 100ZONE10

I 1 110ZONE11

I 1 120ZONE12

I 1 130ZONE13

I 1 140ZONE14

I 1 150ZONE15

I 1 160ZONE16

I 1 170ZONE17

I 1 180ZONE18

I 1 190ZONE19

I 1 200ZONE20

I 1 210ZONE21

I 1 220ZONE22

I 1 230ZONE23

I 1 240ZONE24

I 1 250ZONE25

I 1 260ZONE26

I 1 270ZONE27

I 1 280ZONE28

I 1 290ZONE29

I 1 300ZONE30

IPACKED DS

I P 1 10PACK01

I P 1 20PACK03

I P 1 30PACK05

I P 1 40PACK07

I P 1 50PACK09

I P 1 60PACK11

I P 1 70PACK13

I P 1 80PACK15

I P 1 90PACK17

I P 1 100PACK19

I P 1 110PACK21

I P 1 120PACK23

I P 1 130PACK25

I P 1 140PACK27

I P 1 150PACK29

I P 1 160PACK31

IZONELN DS

I 1 20ZL

C *ENTRY PLIST

C PARM PACKED

C PARM ZONED

C PARM ZONELN

C PARM SETLR 1

C*

C SELEC

C ZL WHEQ 1

C Z-ADDPACK01 ZONE01

C ZL WHEQ 2

C Z-ADDPACK03 ZONE02

C ZL WHEQ 3

C Z-ADDPACK03 ZONE03

C ZL WHEQ 4

C Z-ADDPACK05 ZONE04

C ZL WHEQ 5

C Z-ADDPACK05 ZONE05

C ZL WHEQ 6

C Z-ADDPACK07 ZONE06

C ZL WHEQ 7

C Z-ADDPACK07 ZONE07

C ZL WHEQ 8

C Z-ADDPACK09 ZONE08

C ZL WHEQ 9

C Z-ADDPACK09 ZONE09

C ZL WHEQ 10

C Z-ADDPACK11 ZONE10

C ZL WHEQ 11

C Z-ADDPACK11 ZONE11

C ZL WHEQ 12

C Z-ADDPACK13 ZONE12

C ZL WHEQ 13

C Z-ADDPACK13 ZONE13

C ZL WHEQ 14

C Z-ADDPACK15 ZONE14

C ZL WHEQ 15

C Z-ADDPACK15 ZONE15

C ZL WHEQ 16

C Z-ADDPACK17 ZONE16

C ZL WHEQ 17

C Z-ADDPACK17 ZONE17

C ZL WHEQ 18

C Z-ADDPACK19 ZONE18

C ZL WHEQ 19

C Z-ADDPACK19 ZONE19

C ZL WHEQ 20

C Z-ADDPACK21 ZONE20

C ZL WHEQ 21

C Z-ADDPACK21 ZONE21

C ZL WHEQ 22

C Z-ADDPACK23 ZONE22

C ZL WHEQ 23

C Z-ADDPACK23 ZONE23

C ZL WHEQ 24

C Z-ADDPACK25 ZONE24

C ZL WHEQ 25

C Z-ADDPACK25 ZONE25

C ZL WHEQ 26

C Z-ADDPACK27 ZONE26

C ZL WHEQ 27

C Z-ADDPACK27 ZONE27

C ZL WHEQ 28

C Z-ADDPACK29 ZONE28

C ZL WHEQ 29

C Z-ADDPACK29 ZONE29

C ZL WHEQ 30

C Z-ADDPACK31 ZONE30

C ENDSL

C*

C SETLR IFEQ ‘1’

C SETON LR

C ENDIF

C*

C RETRN class Order {
private int orderNumber;
private int orderDate;

void setOrderDate(int orderDate)
{
this.orderDate = orderDate;
}

*=================================================================

* To compile:

*

* CRTBNDRPG PGM(XXX/SRC015RG) SRCFILE(XXX/QRPGLESRC) +

* TEXT(‘CPP for ISSRCF command’) +

* DFTACTGRP(*NO) ACTGRP(*CALLER) +

* CVTOPT(*VARCHAR) ALWNULL(*YES)

*

*=================================================================

Fqadbxref IF E K DISK

Figure 7: This program converts packed data to zoned decimal format

Figure 8: Using the Java reserved word this

******************************************************************

D answer S 1A

D q_file DS

D file 10A

D filelib 10A

******************************************************************

C *ENTRY PLIST

C PARM q_file

C PARM answer

C key KLIST

C KFLD filelib

C KFLD file

C key CHAIN qadbxref 01

C IF *IN01

C EVAL answer = ‘E’

C ELSE

C SELECT

C WHEN dbxtyp = ‘S’

C EVAL answer = ‘Y’

C WHEN dbxtyp = ‘D’

C EVAL answer = ‘N’

C OTHER

C EVAL answer = ‘U’

C ENDSL

C ENDIF

C EVAL *INLR = *ON /*==================================================================*/

/* To compile: */
/* */

/* CRTCLPGM PGM(XXX/NBR010CL) SRCFILE(XXX/QCLSRC) */
/* */

/*==================================================================*/

PGM PARM(&MINNBR &MAXNBR &RANDNBR)

DCL VAR(&MSGDTA) TYPE(*CHAR) LEN(37)

DCL VAR(&MIN) TYPE(*CHAR) LEN(5)

DCL VAR(&MAX) TYPE(*CHAR) LEN(5)

DCL VAR(&MINNBR) TYPE(*DEC) LEN(5 0)

DCL VAR(&MAXNBR) TYPE(*DEC) LEN(5 0)

DCL VAR(&RANDNBR) TYPE(*DEC) LEN(5 0)

DCL VAR(&MIN_MAX) TYPE(*CHAR) LEN(11)

IF COND(&MINNBR *LT 0 *OR &MINNBR *GT 32767) +

THEN(DO)

GOTO CMDLBL(MINERR)

ENDDO

IF COND(&MAXNBR *LT 0 *OR &MAXNBR *GT 32767) +

THEN(DO)

GOTO CMDLBL(MAXERR)

ENDDO

IF COND(&MINNBR *GT &MAXNBR) THEN(DO)

GOTO CMDLBL(FORMATERR)

ENDDO

CHGVAR VAR(&MIN) VALUE(&MINNBR)

CHGVAR VAR(&MAX) VALUE(&MAXNBR)

CHGVAR VAR(&MIN_MAX) VALUE(&MIN *BCAT &MAX)

CHGVAR VAR(%SST(&MSGDTA 31 5)) VALUE(‘0’)

STRREXPRC SRCMBR(NBR010RX) PARM(&MIN_MAX)

MONMSG MSGID(CPF7CFF) EXEC(DO)

RCVMSG MSGDTA(&MSGDTA)

ENDDO

CHGVAR VAR(&RANDNBR) VALUE(%SST(&MSGDTA 31 5))

RETURN

Figure 9: RPG IV program SRC015RG

MINERR:

SNDPGMMSG MSGID(CPF9898) MSGF(QCPFMSG) MSGDTA(‘Minimum +

value has to be a numeric literal between +

0 and 32767’) MSGTYPE(*ESCAPE)
MAXERR:

SNDPGMMSG MSGID(CPF9898) MSGF(QCPFMSG) MSGDTA(‘Maximum +

value has to be a numeric literal between +

0 and 32767’) MSGTYPE(*ESCAPE)
FORMATERR:

SNDPGMMSG MSGID(CPF9898) MSGF(QCPFMSG) MSGDTA(‘Minimum +

value cannot be greater than maximum +

value’) MSGTYPE(*ESCAPE)
ENDPGM

Figure 10: CL program NBR01CL gives you a random number between 0 and 32,767

parse arg min max

EXIT random(min,max)

Figure 11: This REXX procedure generates the random number

BLOG COMMENTS POWERED BY DISQUS

LATEST COMMENTS

Support MC Press Online

$

Book Reviews

Resource Center

  • SB Profound WC 5536 Have you been wondering about Node.js? Our free Node.js Webinar Series takes you from total beginner to creating a fully-functional IBM i Node.js business application. You can find Part 1 here. In Part 2 of our free Node.js Webinar Series, Brian May teaches you the different tooling options available for writing code, debugging, and using Git for version control. Brian will briefly discuss the different tools available, and demonstrate his preferred setup for Node development on IBM i or any platform. Attend this webinar to learn:

  • SB Profound WP 5539More than ever, there is a demand for IT to deliver innovation. Your IBM i has been an essential part of your business operations for years. However, your organization may struggle to maintain the current system and implement new projects. The thousands of customers we've worked with and surveyed state that expectations regarding the digital footprint and vision of the company are not aligned with the current IT environment.

  • SB HelpSystems ROBOT Generic IBM announced the E1080 servers using the latest Power10 processor in September 2021. The most powerful processor from IBM to date, Power10 is designed to handle the demands of doing business in today’s high-tech atmosphere, including running cloud applications, supporting big data, and managing AI workloads. But what does Power10 mean for your data center? In this recorded webinar, IBMers Dan Sundt and Dylan Boday join IBM Power Champion Tom Huntington for a discussion on why Power10 technology is the right strategic investment if you run IBM i, AIX, or Linux. In this action-packed hour, Tom will share trends from the IBM i and AIX user communities while Dan and Dylan dive into the tech specs for key hardware, including:

  • Magic MarkTRY the one package that solves all your document design and printing challenges on all your platforms. Produce bar code labels, electronic forms, ad hoc reports, and RFID tags – without programming! MarkMagic is the only document design and print solution that combines report writing, WYSIWYG label and forms design, and conditional printing in one integrated product. Make sure your data survives when catastrophe hits. Request your trial now!  Request Now.

  • SB HelpSystems ROBOT GenericForms of ransomware has been around for over 30 years, and with more and more organizations suffering attacks each year, it continues to endure. What has made ransomware such a durable threat and what is the best way to combat it? In order to prevent ransomware, organizations must first understand how it works.

  • SB HelpSystems ROBOT GenericIT security is a top priority for businesses around the world, but most IBM i pros don’t know where to begin—and most cybersecurity experts don’t know IBM i. In this session, Robin Tatam explores the business impact of lax IBM i security, the top vulnerabilities putting IBM i at risk, and the steps you can take to protect your organization. If you’re looking to avoid unexpected downtime or corrupted data, you don’t want to miss this session.

  • SB HelpSystems ROBOT GenericCan you trust all of your users all of the time? A typical end user receives 16 malicious emails each month, but only 17 percent of these phishing campaigns are reported to IT. Once an attack is underway, most organizations won’t discover the breach until six months later. A staggering amount of damage can occur in that time. Despite these risks, 93 percent of organizations are leaving their IBM i systems vulnerable to cybercrime. In this on-demand webinar, IBM i security experts Robin Tatam and Sandi Moore will reveal:

  • FORTRA Disaster protection is vital to every business. Yet, it often consists of patched together procedures that are prone to error. From automatic backups to data encryption to media management, Robot automates the routine (yet often complex) tasks of iSeries backup and recovery, saving you time and money and making the process safer and more reliable. Automate your backups with the Robot Backup and Recovery Solution. Key features include:

  • FORTRAManaging messages on your IBM i can be more than a full-time job if you have to do it manually. Messages need a response and resources must be monitored—often over multiple systems and across platforms. How can you be sure you won’t miss important system events? Automate your message center with the Robot Message Management Solution. Key features include:

  • FORTRAThe thought of printing, distributing, and storing iSeries reports manually may reduce you to tears. Paper and labor costs associated with report generation can spiral out of control. Mountains of paper threaten to swamp your files. Robot automates report bursting, distribution, bundling, and archiving, and offers secure, selective online report viewing. Manage your reports with the Robot Report Management Solution. Key features include:

  • FORTRAFor over 30 years, Robot has been a leader in systems management for IBM i. With batch job creation and scheduling at its core, the Robot Job Scheduling Solution reduces the opportunity for human error and helps you maintain service levels, automating even the biggest, most complex runbooks. Manage your job schedule with the Robot Job Scheduling Solution. Key features include:

  • LANSA Business users want new applications now. Market and regulatory pressures require faster application updates and delivery into production. Your IBM i developers may be approaching retirement, and you see no sure way to fill their positions with experienced developers. In addition, you may be caught between maintaining your existing applications and the uncertainty of moving to something new.

  • LANSAWhen it comes to creating your business applications, there are hundreds of coding platforms and programming languages to choose from. These options range from very complex traditional programming languages to Low-Code platforms where sometimes no traditional coding experience is needed. Download our whitepaper, The Power of Writing Code in a Low-Code Solution, and:

  • LANSASupply Chain is becoming increasingly complex and unpredictable. From raw materials for manufacturing to food supply chains, the journey from source to production to delivery to consumers is marred with inefficiencies, manual processes, shortages, recalls, counterfeits, and scandals. In this webinar, we discuss how:

  • The MC Resource Centers bring you the widest selection of white papers, trial software, and on-demand webcasts for you to choose from. >> Review the list of White Papers, Trial Software or On-Demand Webcast at the MC Press Resource Center. >> Add the items to yru Cart and complet he checkout process and submit

  • Profound Logic Have you been wondering about Node.js? Our free Node.js Webinar Series takes you from total beginner to creating a fully-functional IBM i Node.js business application.

  • SB Profound WC 5536Join us for this hour-long webcast that will explore:

  • Fortra IT managers hoping to find new IBM i talent are discovering that the pool of experienced RPG programmers and operators or administrators with intimate knowledge of the operating system and the applications that run on it is small. This begs the question: How will you manage the platform that supports such a big part of your business? This guide offers strategies and software suggestions to help you plan IT staffing and resources and smooth the transition after your AS/400 talent retires. Read on to learn: