29
Fri, Nov
0 New Articles

Combining AS/400 and NetWare Printing in V3R7

Typography
  • Smaller Small Medium Big Bigger
  • Default Helvetica Segoe Georgia Times

With the release of OS/400 V3R7, IBM is now offering the AS/400 Enhanced Integration for Novell NetWare product. Enhanced Integration for NetWare provides AS/400 software integration with Novell NetWare file servers regardless of whether NetWare is installed on the Integrated PC Server (IPCS, formerly known as FSIOP) or on an Intel-based PC. In addition, Enhanced Integration provides these services to both NetWare 3.12 and 4.1x servers, as well as IntraNetWare servers. Among other things, the Enhanced Integration product synchronizes NetWare and AS/400 user profiles, allows AS/400 users to access data in NetWare Directory Services (NDS) trees, and provides seamless printer sharing between AS/400 and NetWare printer output queues.

In this article, I’ll show you how to use the Enhanced Integration for Novell NetWare product to redirect AS/400 printouts to NetWare printer queues, allowing you to print AS/400 spooled files on a NetWare printer. Before Enhanced Integration, getting AS/400 reports to print on NetWare printers was a hassle that involved tinkering around with Client Access or purchasing a third-party product, such as Personal Communications/400. With Enhanced Integration, it’s easy to redirect AS/400 printouts by creating an AS/400-based NetWare output queue and starting an AS/400 printer as a remote writer.

Pregame Preparation

In order to use Enhanced Integration, you must be running OS/400 V3R7 on a RISC-based AS/400. Enhanced Integration is one of the first IBM products to be offered exclusively for the advanced architecture. There are no plans to retrofit the product to V3R1 or V3R2 systems at this time, so it will not be available on CISC machines.

Once you’re on the RISC architecture, you need to do a little preparation to make Enhanced Integration work in your system. The Enhanced Integration product must


be installed and configured on both your AS/400 and on your NetWare file server. The Integrating AS/400 with NetWare V3R7 manual (SC41-4124-00) explains how to install and configure Enhanced Integration on your AS/400.

In addition to the OS/400 code, Enhanced Integration also ships with two NetWare Loadable Modules (NLMs) called AS4NW410 and AS4NW312. Produced by IBM for the Enhanced Integration product, these NLMs are the NetWare-based components of the product. You load the proper module on your NetWare file server and it processes AS/400 requests for NDS functions or bindery services. For NetWare
4.1x/IntraNetWare servers, you use the AS4NW410 NLM. For NetWare 3.12 systems, you load the AS4NW312 NLM. These NLMs are loaded from the system console or at NetWare startup.

To load the Enhanced Integration NLM on a NetWare 4.1x server, you would enter the following command from the NetWare system console:

LOAD SYS:/AS4NW/AS4NW410 /MAXCNN=xx /CLSALLIDL=yy

To load the Enhanced Integration NLM on a NetWare 3.12 server, you would enter this command:

LOAD SYS:/AS4NW/AS4NW312 /MAXCNN=xx /CLSALLIDL=yy

The /MAXCNN parameter refers to the maximum number of concurrent AS/400 connections the NLM will process on this NetWare server. You can specify any number between 1 and 100. If you don’t specify this parameter, the module will use a default value of 50 connections. The /CLSALLIDL parameter instructs the NLM on how to handle idle AS/400 connections with open files. It works in conjunction with the Start NetWare Connection command (STRNTWCNN) to define when to close idle connections. When an AS/400 connection is started through STRNTWCNN, the Enhanced Integration NLM monitors your AS/400 logins and closes any connection that has been idle for the amount of time specified in STRNTWCNN’s Connection idle time (CNNIDLTIME) parameter.

For connections started through an AS/400 NetWare authentication entry, the Enhanced Integration NLM will close idle connections with open files after a default inactivity time of 15 minutes. STRNTWCNN and Novell authentication entries are discussed in more detail in this issue in the companion article on page 12, “Establishing a Novell NetWare Connection from Inside OS/400.”

Creating the AS/400-to-NetWare Printer

After the Enhanced Integration product is loaded and configured on both your AS/400 and NetWare server, it’s easy to create an AS/400-to-NetWare printer in your network. In order to print AS/400 reports on your NetWare print server, a connection must be specified between your AS/400 and Novell NetWare. As mentioned above, this connection can be started by using STRNTWCNN or by specifying an AS/400 NetWare authentication entry for each user who wants to print to that NetWare output queue. There are pros and cons to each method, but one of these two connections must be established before you can send OS/400 reports to Novell NetWare. Once your connection is established, setting up your AS/400-to-NetWare printer is a simple matter of creating an OS/400-NetWare output queue and running the OS/400 Start Remote Writer (STRRMTWTR) command. Let’s look at each of these two procedures and see what’s involved.

Creating the AS/400-NetWare Output Queue

You create an OS/400-NetWare output queue for combined AS/400-NetWare printing the same way you create other AS/400 output queues—by using the OS/400 Create Output Queue (CRTOUTQ) command. For our example, let’s assume you want to create a


combined output queue called NETPRT1 that redirects your AS/400 reports to a NetWare printer queue called PUBS on your local NetWare 4.1x server. To do this, you enter the CRTOUTQ command on your AS/400 and fill in the parameters as shown in Figures 1 and
2. Keep in mind that this isn’t programming your VCR here. Most of the parameters you enter are the exact same values you enter for any other AS/400 output queue. The only difference is that you enter additional values as shown in our figures to specify that OS/400 is to redirect any report sent to that output queue to a NetWare printer.

One of these parameters needs a little more explanation—the Remote system parameter. It specifies which NetWare file server this output queue services. There are three possible values you can specify here: the actual name of the NetWare 3.12 server, the tree name of the NetWare 4.1x or IntraNetWare server, or the literal *NWSA that tells OS/400 to use the default NetWare Network Server attributes that are defined systemwide in OS/400.

When you use *NWSA for the RMTSYS value, OS/400 takes the remote system name from the default NetWare network server attributes defined in OS/400. When V3R7 is installed, those values are set for users of the IBM LAN Server for OS/400

product, so they have to be modified for NetWare usage. To view the default NetWare network server attributes for your system, type in the Display Network Server Attributes (DSPNWSA) command with the following parameters:

DSPNWSA OPTION(*NETWARE)

To change your default NetWare attributes, type in the Change Network Server Attributes (CHGNWSA) command as follows and press F4:

CHGNWSA PMTCTL(*NETWARE)

This brings up the screen shown in Figure 3. This command allows you to view and change the default NetWare network server attributes for your AS/400. More information about network server attributes can be found in the Integrating AS/400 with NetWare V3R7 manual.

The remaining parameters for the CRTOUTQ are as follows: Remote printer queue: This parameter specifies the full NetWare context of the NetWare printer queue that will receive your AS/400 reports.

Connection type: This specifies the protocol you are using to communicate with the NetWare server. You must specify the connection type as *IPX for AS/400-to-NetWare printing.

Destination type: This specifies the type of computer you are sending data to, such as a NetWare NDS server or another OS/400 machine. For combined printing, set this parameter to *NDS for NetWare 4.1x and IntraNetWare systems and *NETWARE3 for NetWare 3.12 servers.

Manufacturer type and model: This specifies how OS/400 should format the report output for the actual printer attached to the NetWare printer queue. For example, should it be formatted to print on a Hewlett-Packard or other non-IBM printer?

Destination options: These are additional parameters you can specify that tell OS/400 and NetWare how the printed output should be handled. Multiple values can be entered here, but the most significant value is the *NOWAIT option. If *NOWAIT is specified, a spooled file is removed from the AS/400 output queue as soon as the entire file is sent to the NetWare queue. If you don’t select this option, spooled files are kept on the AS/400 until they are printed in NetWare or they are deleted from the NetWare printer queue.

Starting the AS/400-to-NetWare Printer

As long as you have established a connection to your NetWare server through the STRNTWCNN command or through an AS/400 NetWare authentication entry, you can begin printing AS/400 reports on your NetWare printer. To start sending AS/400 printouts


to a NetWare printer, use the OS/400 Start Remote Writer (STRRMTWTR) command. If you wanted to tell your NETPRT1 writer to send OS/400 reports to the PUBS printer on our NetWare 4.1x server, you would enter the following command:

STRRMTWTR OUTQ(NETPRT1)

Any AS/400 printouts in NETPRT1 would automatically start printing on the NetWare printer that services the PUBS printer queue.

Putting It All Together

As you can see, printing AS/400 reports to a NetWare-connected printer isn’t very hard as long as you know the drill. Here are the steps you go through to bring up your AS/400-to-NetWare printer on a V3R7 machine.

1. Install Enhanced Integration for NetWare on your AS/400.
2. Load the Enhanced Integration NLM on your NetWare 4.1x, IntraNetWare, or NetWare 3.12 file server.
3. Create an AS/400-NetWare output queue using the CRTOUTQ command.
4. Start an AS/400-to-NetWare connection by using the STRNTWCNN command or through an AS/400 NetWare Authentication entry.
5. Start your AS/400-to-Netware printer by using the STRRMTWTR command. And that’s all there is to it—instant shared printing between the AS/400 and Novell NetWare, courtesy of V3R7 and the Enhanced Integration for NetWare product.

Figure 1: Sample CRTOUTQ Command for OS/400-NetWare Printing, Part 1


Combining_AS-_400_and_NetWare_Printing_in_V3R704-00.jpg 450x276

Combining_AS-_400_and_NetWare_Printing_in_V3R705-00.jpg 450x302

Figure 2: Sample CRTOUTQ Command for OS/400-NetWare Printing, Part 2 Figure 3: Sample Change Network Server Attributes (CHGNWSA) Command


Combining_AS-_400_and_NetWare_Printing_in_V3R705-01.jpg 450x288

BLOG COMMENTS POWERED BY DISQUS

LATEST COMMENTS

Support MC Press Online

$

Book Reviews

Resource Center

  • SB Profound WC 5536 Have you been wondering about Node.js? Our free Node.js Webinar Series takes you from total beginner to creating a fully-functional IBM i Node.js business application. You can find Part 1 here. In Part 2 of our free Node.js Webinar Series, Brian May teaches you the different tooling options available for writing code, debugging, and using Git for version control. Brian will briefly discuss the different tools available, and demonstrate his preferred setup for Node development on IBM i or any platform. Attend this webinar to learn:

  • SB Profound WP 5539More than ever, there is a demand for IT to deliver innovation. Your IBM i has been an essential part of your business operations for years. However, your organization may struggle to maintain the current system and implement new projects. The thousands of customers we've worked with and surveyed state that expectations regarding the digital footprint and vision of the company are not aligned with the current IT environment.

  • SB HelpSystems ROBOT Generic IBM announced the E1080 servers using the latest Power10 processor in September 2021. The most powerful processor from IBM to date, Power10 is designed to handle the demands of doing business in today’s high-tech atmosphere, including running cloud applications, supporting big data, and managing AI workloads. But what does Power10 mean for your data center? In this recorded webinar, IBMers Dan Sundt and Dylan Boday join IBM Power Champion Tom Huntington for a discussion on why Power10 technology is the right strategic investment if you run IBM i, AIX, or Linux. In this action-packed hour, Tom will share trends from the IBM i and AIX user communities while Dan and Dylan dive into the tech specs for key hardware, including:

  • Magic MarkTRY the one package that solves all your document design and printing challenges on all your platforms. Produce bar code labels, electronic forms, ad hoc reports, and RFID tags – without programming! MarkMagic is the only document design and print solution that combines report writing, WYSIWYG label and forms design, and conditional printing in one integrated product. Make sure your data survives when catastrophe hits. Request your trial now!  Request Now.

  • SB HelpSystems ROBOT GenericForms of ransomware has been around for over 30 years, and with more and more organizations suffering attacks each year, it continues to endure. What has made ransomware such a durable threat and what is the best way to combat it? In order to prevent ransomware, organizations must first understand how it works.

  • SB HelpSystems ROBOT GenericIT security is a top priority for businesses around the world, but most IBM i pros don’t know where to begin—and most cybersecurity experts don’t know IBM i. In this session, Robin Tatam explores the business impact of lax IBM i security, the top vulnerabilities putting IBM i at risk, and the steps you can take to protect your organization. If you’re looking to avoid unexpected downtime or corrupted data, you don’t want to miss this session.

  • SB HelpSystems ROBOT GenericCan you trust all of your users all of the time? A typical end user receives 16 malicious emails each month, but only 17 percent of these phishing campaigns are reported to IT. Once an attack is underway, most organizations won’t discover the breach until six months later. A staggering amount of damage can occur in that time. Despite these risks, 93 percent of organizations are leaving their IBM i systems vulnerable to cybercrime. In this on-demand webinar, IBM i security experts Robin Tatam and Sandi Moore will reveal:

  • FORTRA Disaster protection is vital to every business. Yet, it often consists of patched together procedures that are prone to error. From automatic backups to data encryption to media management, Robot automates the routine (yet often complex) tasks of iSeries backup and recovery, saving you time and money and making the process safer and more reliable. Automate your backups with the Robot Backup and Recovery Solution. Key features include:

  • FORTRAManaging messages on your IBM i can be more than a full-time job if you have to do it manually. Messages need a response and resources must be monitored—often over multiple systems and across platforms. How can you be sure you won’t miss important system events? Automate your message center with the Robot Message Management Solution. Key features include:

  • FORTRAThe thought of printing, distributing, and storing iSeries reports manually may reduce you to tears. Paper and labor costs associated with report generation can spiral out of control. Mountains of paper threaten to swamp your files. Robot automates report bursting, distribution, bundling, and archiving, and offers secure, selective online report viewing. Manage your reports with the Robot Report Management Solution. Key features include:

  • FORTRAFor over 30 years, Robot has been a leader in systems management for IBM i. With batch job creation and scheduling at its core, the Robot Job Scheduling Solution reduces the opportunity for human error and helps you maintain service levels, automating even the biggest, most complex runbooks. Manage your job schedule with the Robot Job Scheduling Solution. Key features include:

  • LANSA Business users want new applications now. Market and regulatory pressures require faster application updates and delivery into production. Your IBM i developers may be approaching retirement, and you see no sure way to fill their positions with experienced developers. In addition, you may be caught between maintaining your existing applications and the uncertainty of moving to something new.

  • LANSAWhen it comes to creating your business applications, there are hundreds of coding platforms and programming languages to choose from. These options range from very complex traditional programming languages to Low-Code platforms where sometimes no traditional coding experience is needed. Download our whitepaper, The Power of Writing Code in a Low-Code Solution, and:

  • LANSASupply Chain is becoming increasingly complex and unpredictable. From raw materials for manufacturing to food supply chains, the journey from source to production to delivery to consumers is marred with inefficiencies, manual processes, shortages, recalls, counterfeits, and scandals. In this webinar, we discuss how:

  • The MC Resource Centers bring you the widest selection of white papers, trial software, and on-demand webcasts for you to choose from. >> Review the list of White Papers, Trial Software or On-Demand Webcast at the MC Press Resource Center. >> Add the items to yru Cart and complet he checkout process and submit

  • Profound Logic Have you been wondering about Node.js? Our free Node.js Webinar Series takes you from total beginner to creating a fully-functional IBM i Node.js business application.

  • SB Profound WC 5536Join us for this hour-long webcast that will explore:

  • Fortra IT managers hoping to find new IBM i talent are discovering that the pool of experienced RPG programmers and operators or administrators with intimate knowledge of the operating system and the applications that run on it is small. This begs the question: How will you manage the platform that supports such a big part of your business? This guide offers strategies and software suggestions to help you plan IT staffing and resources and smooth the transition after your AS/400 talent retires. Read on to learn: