29
Fri, Nov
0 New Articles

Technology's Revenge

Commentary
Typography
  • Smaller Small Medium Big Bigger
  • Default Helvetica Segoe Georgia Times

Woody Allen had a standup comedy act during the mid-1960s. Because I was born in late 1952, I already had a few years under my oversized belt by the mid-1960s, but I wasn't yet old enough to have seen Allen live during his nightclub years. Fortunately, a record company produced a double album set of some of his bits. For the benefit of those of you who are too young to know what records and albums are, allow me to pause to explain that they were the first, crude attempts at creating what we now know as Frisbees. Records had a benefit not found on Frisbees. They could also be used to record (which is probably why they were called "records") and play sounds. If you can't get your hands on what we quaintly called a "record player," don't worry. The Woody Allen recordings are now also available on a double CD set.

In one of his routines, Allen mentions that he has "never had good relationships with mechanical objects of any sort. Anything that I can't reason with, kiss, or fondle I get into trouble with." He goes on to describe the many problems that he had with his appliances, including a television set that he once beat the hell out of because, despite having first tried to reason with it, the set refused to work properly. Allen goes on to say that sometime later he used an elevator that had speech synthesis and recognition capabilities. After Allen called out his floor, the elevator asked, "Are you the guy that hit the television set?" It then zoomed up and down between floors, threw him out on the basement, and made an anti-Semitic remark.

My abridged version doesn't come close to doing justice to Allen's routine, so I recommend that you get the CD. The point is that I used to think that the story was a joke, but I'm beginning to believe that it was non-fiction.

I've become convinced that our technologies are now sentient and literate. That wouldn't be so bad, but I think that they've been reading my technology tirades and, as a result of what I've written, they're out to get me.

Let me give you an example. Until recently, my telephone has been the most reliable technology I can imagine. I pick up the handset and make or receive a call. End of story. It's been so flawless that I almost forget that my phone and the systems behind it are technology. For me, the definition of "technology" had always been anything that is utterly incapable of doing what it is supposed to do. I modified that from "anything" to "any mechanical, electrical, or electronic object" when I realized that the former definition might be misinterpreted as encompassing many government employees.

A week or two ago, I changed my long-distance phone plan to get a cheaper rate when calling into the U.S. I stayed with the same long-distance carrier, and everything else about the plan is 100% identical to the one I had before. Of course, the company didn't tell me about this new, cheaper plan. I had to stumble upon it on my own, but never mind.

Shortly after switching plans, I tried to make a long-distance call and got a message telling me that my call could not be connected due to technical difficulties. I tried a few more times and got the same message.

I called my long-distance carrier's customer support line and was told that the problem had nothing to do with changing plans and I should try again. I did and got the same message. I tried one more time and everything was fine.

A few days later, I called an out-of-town business associate. I was connected without incident. We talked for a while and then, without warning, our conversation was cut off. My colleague heard nothing other than, eventually, a dial tone. While he was busy hearing nothing and then a dial tone, I was hearing the same message that I had been getting before--something to the effect of "your call cannot be connected due to technical difficulties." Connected? My call had already been connected. I just wanted to finish my conversation. Did my long-distance carrier suddenly, in mid-call, decide that I was no longer a worthy customer? I immediately checked my credit card statement and verified that I had paid my long-distance bill.

Again I called the customer support line. This time, I was told that somebody had switched my long-distance carrier. Living alone, I was reasonably certain that it was not somebody who should have had access to my phone. I'm getting old, but I usually remember stuff like that.

I was given a number to call that would provide an automated message telling me which carrier I had been magically switched to. The support person promised to call me back in two minutes. Why is it that these people will never let me call them? Are they afraid that I'm going to try to telemarket to them for a change? Then again, maybe it was because both of the customer service people I talked to, along with some telemarketers who called me recently from the same company, all had the same accent, and it was one that suggested there might be an ocean between us.

I called the number and a mechanical voice assured me that I was still with the same carrier. The customer support person called me back as promised and feigned shock at this piece of news. I suspect that he was just making it up as he went along.

After some discussion, he came up with the perfect solution. He put me on hold for 10 minutes while he consulted with the company's technical department. When he came back on the line, he did what all of the truly great customer support people do: He passed the buck. He told me that, "After a thorough check of all of our systems, we've determined that the problem isn't with us at all. No, no, no. The problem is with the provider of your local phone service [which is the company that used to be a monopoly before long-distance and, now, local telephone competition came to Canada]. Yup, it has to be your local phone service provider. Oh yes, absolutely. It couldn't possibly be us. Now that we've solved your problem to the best of our ability, kindly go away and leave us alone. If there's anything else we can ever possibly do for you, anything at all, please don't hesitate to visit our Web site. Thank you and have a nice day."

I thought about calling the company that provides my local phone service, but I'm 52. As of 1996 (the most recent statistics I could find), the average lifespan of a Canadian male was 75.4 years. I don't think that leaves me sufficient time to sit on hold while I try to reach one of the phone company's customer service people. Instead, I just gave a burnt offering to the phone god and hoped that it would banish the problem. So far, it's worked.

One incident doesn't prove that my technology is out to get me. But wait. There's more.

A couple of weeks ago, my computer slowed to a crawl. This frustrating condition lasted only a few minutes. It was then replaced by an even more frustrating condition, i.e., my computer stopped working altogether.

I use a laptop computer. If you press its power button briefly, the computer is supposed to shut down Windows before powering itself off. This doesn't do much good when Windows absolutely refuses to respond to any button that you might choose to press. When the computer is operating--or more accurately, not operating under this condition--you have to hold down the power button until you get a cramp in your finger before the computer will shut off so that you can restart it. It might be my imagination, but I think that there is some sort of sophisticated sensor that actually detects the cramping sensation in order to enable this feature.

I rebooted and, after a while, the same thing happened again. After doing this a few more times, I remembered that the definition of insanity is repeating the same actions over and over again expecting to get a different result. The recollection of this definition inspired me to use the few seconds after my computer started but before it totally seized up to open the Windows task manager and determine that it was probably my antivirus software that was causing the problem. I stopped the software, uninstalled and reinstalled it, reapplied all of the accumulated updates that had been provided for it since my purchase, and everything once again worked as it was supposed to work.

That is, it worked as it was supposed to work, but only for a few days. Then, without warning, my computer's keyboard stopped recognizing the "s" key. Ever since I started writing these columns, whenever I encounter a problem with one technology or another I like to quickly type a few notes into my computer in case I might later be able to spin the problem out into a full-blown tirade. When I ran into the "s" key problem, I immediately typed just such a note: "My computer i a piece of hit."

In retrospect, it's fortunate that it was the "s" key that stopped working and not, say, "z" or "x." MC Press prefers that I don't use profanity here. Had the "s" key been functional I doubt I would have been allowed to use that sentence.

As it turned out, it wasn't a mechanical problem. I still don't know what caused it, but after I rebooted my system the "s" key worked perfectly. Go figure.

Those are just the issues that were serious enough for me to justify reporting here. One of the blessings--or is it a curse--of writing these tirades is that I now have lower expectations for technology than other people. I was recently talking to someone who complained that Windows was taking far too long to start up on his machine. This was a long-time programmer, so you would think that his technology expectation level would be appropriate.

I didn't know what he was talking about. Windows loads quite quickly on my system.

I work out of my home. Each morning, the first thing I do when I go downstairs is turn on my computer. I then make some coffee and eat a leisurely breakfast while reading an article or two in the morning newspaper. When I go back into my office, I'm confident that my computer will be displaying the Windows sign-on screen, allowing me to type in my password and press the Enter key so that Windows can complete its startup process.

Next, I finish reading the paper, fulfill my morning toilet requirements, take a shower, get dressed, and come back downstairs. By then, Windows is usually fully loaded and ready for me to do work. The only exceptions occur when Windows crashes while trying to boot up. When that happens, rather than displaying the Windows desktop, my computer automatically reboots to the sign-on screen. That rarely occurs more than four or five times a week, so it doesn't bother me. Thus, it has been my experience that there is no reason to complain about the speed of the Windows startup process. But maybe I've lowered my expectations a little bit too much.

Because of all of these problems--problems that I'm certain demonstrate intent and malice on the part of my technologies--I'm afraid to use my vacuum cleaner. I'm certain that it will turn on me and swallow me whole. At least, that's my story and I'm sticking to it. Now I just need an excuse for not dusting.

Joel Klebanoff is a consultant, a writer, and president of Klebanoff Associates, Inc., a Toronto, Canada-based marketing communications firm. Joel has 25 years experience working in IT, first as a programmer/analyst and then as a marketer. He holds a Bachelor of Science in computer science and an MBA, both from the University of Toronto. Contact Joel at This email address is being protected from spambots. You need JavaScript enabled to view it.. If his refrigerator, espresso machine, or other essential appliance is reading this, he wishes to let it know that, despite his ongoing feeble attempts at humor, he really does love and revere it.

Joel Klebanoff

Joel Klebanoff is a consultant, writer, and formerly president of Klebanoff Associates, Inc., a Toronto-based marketing communications firm. He has 30 years' experience in various IT capacities and now specializes in writing articles, white papers, and case studies for IT vendors and publications across North America. Joel is also the author of BYTE-ing Satire, a compilation of a year's worth of his columns. He holds a BS in computer science and an MBA, both from the University of Toronto.


MC Press books written by Joel Klebanoff available now on the MC Press Bookstore.

BYTE-ing Satire BYTE-ing Satire
Find out the hilarious answer to the eternal question: "Is technology more hindrance than help?"
List Price $14.95

Now On Sale

BLOG COMMENTS POWERED BY DISQUS

LATEST COMMENTS

Support MC Press Online

$

Book Reviews

Resource Center

  • SB Profound WC 5536 Have you been wondering about Node.js? Our free Node.js Webinar Series takes you from total beginner to creating a fully-functional IBM i Node.js business application. You can find Part 1 here. In Part 2 of our free Node.js Webinar Series, Brian May teaches you the different tooling options available for writing code, debugging, and using Git for version control. Brian will briefly discuss the different tools available, and demonstrate his preferred setup for Node development on IBM i or any platform. Attend this webinar to learn:

  • SB Profound WP 5539More than ever, there is a demand for IT to deliver innovation. Your IBM i has been an essential part of your business operations for years. However, your organization may struggle to maintain the current system and implement new projects. The thousands of customers we've worked with and surveyed state that expectations regarding the digital footprint and vision of the company are not aligned with the current IT environment.

  • SB HelpSystems ROBOT Generic IBM announced the E1080 servers using the latest Power10 processor in September 2021. The most powerful processor from IBM to date, Power10 is designed to handle the demands of doing business in today’s high-tech atmosphere, including running cloud applications, supporting big data, and managing AI workloads. But what does Power10 mean for your data center? In this recorded webinar, IBMers Dan Sundt and Dylan Boday join IBM Power Champion Tom Huntington for a discussion on why Power10 technology is the right strategic investment if you run IBM i, AIX, or Linux. In this action-packed hour, Tom will share trends from the IBM i and AIX user communities while Dan and Dylan dive into the tech specs for key hardware, including:

  • Magic MarkTRY the one package that solves all your document design and printing challenges on all your platforms. Produce bar code labels, electronic forms, ad hoc reports, and RFID tags – without programming! MarkMagic is the only document design and print solution that combines report writing, WYSIWYG label and forms design, and conditional printing in one integrated product. Make sure your data survives when catastrophe hits. Request your trial now!  Request Now.

  • SB HelpSystems ROBOT GenericForms of ransomware has been around for over 30 years, and with more and more organizations suffering attacks each year, it continues to endure. What has made ransomware such a durable threat and what is the best way to combat it? In order to prevent ransomware, organizations must first understand how it works.

  • SB HelpSystems ROBOT GenericIT security is a top priority for businesses around the world, but most IBM i pros don’t know where to begin—and most cybersecurity experts don’t know IBM i. In this session, Robin Tatam explores the business impact of lax IBM i security, the top vulnerabilities putting IBM i at risk, and the steps you can take to protect your organization. If you’re looking to avoid unexpected downtime or corrupted data, you don’t want to miss this session.

  • SB HelpSystems ROBOT GenericCan you trust all of your users all of the time? A typical end user receives 16 malicious emails each month, but only 17 percent of these phishing campaigns are reported to IT. Once an attack is underway, most organizations won’t discover the breach until six months later. A staggering amount of damage can occur in that time. Despite these risks, 93 percent of organizations are leaving their IBM i systems vulnerable to cybercrime. In this on-demand webinar, IBM i security experts Robin Tatam and Sandi Moore will reveal:

  • FORTRA Disaster protection is vital to every business. Yet, it often consists of patched together procedures that are prone to error. From automatic backups to data encryption to media management, Robot automates the routine (yet often complex) tasks of iSeries backup and recovery, saving you time and money and making the process safer and more reliable. Automate your backups with the Robot Backup and Recovery Solution. Key features include:

  • FORTRAManaging messages on your IBM i can be more than a full-time job if you have to do it manually. Messages need a response and resources must be monitored—often over multiple systems and across platforms. How can you be sure you won’t miss important system events? Automate your message center with the Robot Message Management Solution. Key features include:

  • FORTRAThe thought of printing, distributing, and storing iSeries reports manually may reduce you to tears. Paper and labor costs associated with report generation can spiral out of control. Mountains of paper threaten to swamp your files. Robot automates report bursting, distribution, bundling, and archiving, and offers secure, selective online report viewing. Manage your reports with the Robot Report Management Solution. Key features include:

  • FORTRAFor over 30 years, Robot has been a leader in systems management for IBM i. With batch job creation and scheduling at its core, the Robot Job Scheduling Solution reduces the opportunity for human error and helps you maintain service levels, automating even the biggest, most complex runbooks. Manage your job schedule with the Robot Job Scheduling Solution. Key features include:

  • LANSA Business users want new applications now. Market and regulatory pressures require faster application updates and delivery into production. Your IBM i developers may be approaching retirement, and you see no sure way to fill their positions with experienced developers. In addition, you may be caught between maintaining your existing applications and the uncertainty of moving to something new.

  • LANSAWhen it comes to creating your business applications, there are hundreds of coding platforms and programming languages to choose from. These options range from very complex traditional programming languages to Low-Code platforms where sometimes no traditional coding experience is needed. Download our whitepaper, The Power of Writing Code in a Low-Code Solution, and:

  • LANSASupply Chain is becoming increasingly complex and unpredictable. From raw materials for manufacturing to food supply chains, the journey from source to production to delivery to consumers is marred with inefficiencies, manual processes, shortages, recalls, counterfeits, and scandals. In this webinar, we discuss how:

  • The MC Resource Centers bring you the widest selection of white papers, trial software, and on-demand webcasts for you to choose from. >> Review the list of White Papers, Trial Software or On-Demand Webcast at the MC Press Resource Center. >> Add the items to yru Cart and complet he checkout process and submit

  • Profound Logic Have you been wondering about Node.js? Our free Node.js Webinar Series takes you from total beginner to creating a fully-functional IBM i Node.js business application.

  • SB Profound WC 5536Join us for this hour-long webcast that will explore:

  • Fortra IT managers hoping to find new IBM i talent are discovering that the pool of experienced RPG programmers and operators or administrators with intimate knowledge of the operating system and the applications that run on it is small. This begs the question: How will you manage the platform that supports such a big part of your business? This guide offers strategies and software suggestions to help you plan IT staffing and resources and smooth the transition after your AS/400 talent retires. Read on to learn: